cancel
Showing results for 
Search instead for 
Did you mean: 
Denys13
New member
2 1 0 0
Message 1 of 6
11,959
Flag Post

Reset BIOS password on HP Z440

HP Recommended
HP Z440 Workstation
Microsoft Windows 10 (64-bit)

I forgot the BIOS password, how do I reset it?

 

Serial No. **Bleep**

Product No. F5W13AV

5 REPLIES 5
Paul_Tikkanen
Level 21
Level 21
130,966 121,143 19,887 30,415
Message 2 of 6
Flag Post
HP Recommended

Hi:

 

If you did not set stringent security when you created the BIOS P/W, you can clear it by removing the green password jumper on the motherboard.

 

See chapter 6, page 99 and 100 of the service manual at the link below, for how to clear the BIOS P/W.

 

http://h10032.www1.hp.com/ctg/Manual/c04823811

0 Kudos
Denys13
Author
New member
2 1 0 0
Message 3 of 6
Flag Post
HP Recommended

I have long put the password and no longer logged into the BIOS, so I do not remember what level of security I put. I took out the CMOS-battery for 12 hours, but this did not help reset the password

now try the option with a jumper...

0 Kudos
DDC_SD
New member
1 1 0 0
Message 4 of 6
Flag Post
HP Recommended

For my Z440 they said to with power disconnected and also disconnect other peripherals...then press this YELLOW button for 5 seconds. Then reconnect everything and boot PC up. Well, I followed their direction and still it didn't clear BIOS password.

0 Kudos
Paul_Tikkanen
Level 21
Level 21
130,966 121,143 19,887 30,415
Message 5 of 6
Flag Post
HP Recommended

Pressing the yellow clear CMOS button does not clear the BIOS P/W.

 

Did you not read the reply I posted above for how to clear the P/W?

That is the only way you can do it.

kevin-t
Retired
Retired
20,511 15,846 324 972
Message 6 of 6
Flag Post
HP Recommended

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you


I work on behalf of HP
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation