Screen stuck on hp logo

[Manash90]

Hello! I’m using a notebook ho spectre x360 convertible.I reset my pc removing everything then after the completion of reset it restarted and is stuck in the hp logo and won’t boot up. It just boots on and off.

[WAWood]

@Manash90 

I can certainly understand the desire to do factory resets -- given the prevalent view that such an action, though extreme, will fix a variety of mysterious problems and return a troublesome PC to working condition.

Problem is -- that very often is NOT the case and if there is any hardware issue at all, which is nearly always the cause with a SLOW PC (which is why most folks do the factory resets), you end up trashing your PC and rendering it useless. So, you trade a SLOW PC for a non-working PC. Not a good trade -- and certainly not what you intended.

In addition, if you start the reset and it does not complete but hangs or crashes before done, that is almost certainly an indication of a failing drive.

So let's check for the drive failing, if your PC is new enough to support UEFI, you can use these steps to test the drive: http://support.hp.com/us-en/document/c00439024

If not, you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) press the Function key for testing the hard drive (usually F2) and let it run.

If the test will not run or if it fails, that indicates that your drive has failed and would need to be replaced.

[Manash90]

I tried and it passed all the test i test each and every test in that menu. But the problem is, it’s  just stuck on the ho logo.

[WAWood]

@Manash90 

OK, if the drive passed the test, then you might be able to get the PC working again following the instructions below:

Windows PCs use two different sets of files to get you to a working desktop.
In terms of the first, Windows boot files, you need to follow the instructions below to create boot media from Macrium Reflect (MR) that can be used to rewrite/repair the boot files on your PC:
1) Download and install Macrium Reflect (MR) from this link on a working PC: http://www.macrium.com/reflectfree.aspx
2) Use the option to create a boot USB stick or CD

That will create MR bootable media. Then, you can boot your PC into WinPE using that media.

Have patience, as that can take a while to start and bring up the screen.

Once the screen is there, select the option to Fix Windows boot problems. It will then search for the OSs installed and list them, Select the one you want to repair and click Next.

It will now do the repairs, listing the things it has done.

When finished, select the option to Restart the PC.

If this worked, the boot repair succeeded and you will have your PC back.

But if it did not, the Windows system files are most likely corrupted and you would have to reinstall Windows from scratch to fix that.