System thread Exception Not Handles

[GRutz]

Computer trapped in loop. HP screen to Blue screen with: Syatem_Thread_Exception_Not_Handled.

Have tried the turn off/turn on procedure. Can't get to the WinRe screen. And have run all the system/symptoms checks.

Help....

Greg

[Riddle_Decipher]

@GRutz I understand the computer gets a blue screen error, However, since you haven’t captured the error code or message,

I would request you to follow the below steps to capture and reply back with the error message/code to identify the issue and find a permanent fix:

Check if the device boots into safe mode: click here for steps and then try the below steps:

• In Windows, search for and open View advanced system settings.
• In the Advanced tab, under Startup and Recovery, click Settings.
• Under System Failure, remove the check mark next to automatically restart, and then click OK.
• Restart the computer to apply the change.
• The computer no longer restarts automatically when a blue screen error occurs.

For more details: click here

​​Please reply back with the error code as the issue is code specific and it would be rather easier to provide an accurate solution using the same.

P.S: Welcome to HP Community 😉

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.