Create an account on the HP Community to personalize your profile and ask a question
06-28-2017 11:13 AM - edited 06-29-2017 04:10 AM
Product: HP Pavilion 500-210ed
Operating System: Microsoft Windows 10 (64-bit)
Windows doesn't boot when I start my desktop pc. Instead, an error appears saying there's no boot device found and no operating system on my hard disk (3FO). I tried hard-resetting my pc as well as running some diagnostic tests (using UEFI), both as suggested online by HP Support, but to no avail.
HOWEVER, when I boot into the BIOS on startup (by pressing F10) and reset the BIOS to the default settings through the menu, then Windows magically boots! Only problem is, I have to go through this everytime I startup the desktop pc. Unless I reset the BIOS settings, Windows won't boot.
I read about updating the BIOS or replacing the CMOS battery, but I would like to go over other options before I try that. The desktop pc had Windows 8 / 8.1 installed on it previously, by the way.
Also, the hard disk is recognized by the BIOS. Are there any options in the BIOS I could change to solve my problem?
I thought this could maybe have to do with updates that were installed, please see the screenshot below(in Dutch, unfortunately, although the package names are probably the same).
Really appreciate your help!
Solved! Go to Solution.
1 ACCEPTED SOLUTION
9 REPLIES 9
06-29-2017 08:41 AM
> Are there any options in the BIOS I could change to solve my problem?
Is there any setting to "delay" for a short time, until the disk-drive becomes "ready" ?
It could be the situation that the disk-drive is not "ready", and you get the error-message,
but by entering BIOS SETUP, you are giving the disk-drive more seconds to become "ready".
06-29-2017 09:23 AM
> It's strange however that this problem suddenly emerged, as it wasn't a problem before – no clue why.
It's not strange -- if your disk-drive is getting "worn-out", and, as a result, slower to get from "not spinning" to "ready", then it is not strange that "suddenly" some threshold has now been exceeded.
Compare to a worn-out automobile tire -- "suddenly" you notice that it is worn out to the point where the "wear-bars" are showing.
07-01-2017 10:22 AM
> Windows doesn't boot when I start my desktop PC.
> Instead, an error appears saying there's no boot device found, and no operating system on my hard disk (3FO).
> Also, the hard disk is recognized by the BIOS.
Those two statements are contradictory, and implies a "flaky" disk-drive.
Before the current disk-drive *ALWAYS* fails to boot, I would purchase a new disk-drive, and "clone" (byte-by-byte) from the current disk-drive to the new disk-drive, and then boot from the new disk-drive.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community