-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
- HP Community
- Desktops
- Desktop Boot and Lockup
- error 3F0

Create an account on the HP Community to personalize your profile and ask a question
02-19-2021 01:24 AM
I installed new ssd, OS Office all installed perfectly and in working order. I did this at my desk.
Put the workstation at final distination, booted workstation and get a 3F0 error, boot device not found. Shut workstation down, moved it to my desk, connected all cables and workstatons boots no problem.
Repeated moving workstation and got same 3F0 error at final destination.
Now its back at my desk and all works fine.
Bios is up to date, tried factory defaults, but not working at final destination. All fine at my desk.
Workstation is connected to 2x Ilyama 27"monitor, keyboard, mouse, waco Intuos Pro tablet.
Need help
Solved! Go to Solution.
Accepted Solutions
02-25-2021 03:21 AM
Yes, used same keyboard and mouse.
It turned out that a used displayport cable (btween monitor and workstation) might have been the problem. After replacing the cable with a brand new one the workstations boots with no problems at all.
I still do not understand why?? but end user is verry happy.
Thanks for all sugestions.
02-19-2021 06:19 AM
If you are moving a formatted windows installed disk from one pc to another you will have to match the settings in setup. If the pc you installed windows in has a mbr/legacy boot then the pc it goes into will need the same. If the pc in which you installed windows has uefi /gpt format then the pc in which it goes will need the same in setup.
02-25-2021 03:21 AM
Yes, used same keyboard and mouse.
It turned out that a used displayport cable (btween monitor and workstation) might have been the problem. After replacing the cable with a brand new one the workstations boots with no problems at all.
I still do not understand why?? but end user is verry happy.
Thanks for all sugestions.
Didn't find what you were looking for? Ask the community