I'm trying to add a standard Samsung SSD as the system drive of my Z620 on either SATA-0 or SATA-1. The SATA-0 and SATA-1 connectors are 'hard mounted' in 3.5-inch drive bays 0 and 1 of the modular drive cage. I have two 3.5-inch to 2.5-inch adapter brackets and, when inserted into the standard HP 3.5-inch drive trays, neither come even close to aligning the drive connectors to the cable connectors. Does the Z620 require a special HP 3.5-inch to 2.5-inch adapter bracket? Or maybe I'm overlooking something? Thanks.
I used the item that is linked above. My setup is exactly like this (Image is from a reviewer from the Amazon link).
Edit: I haven't had any issues with the adapter and it lines up properly when pushed into the mount. I have also tried the adapters and on all three slots and they lined up. Though, I am using a HDD for the SATA II slot now.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".