-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
The specs of your machine is
https://support.hp.com/au-en/document/c06448545
Its motherboard supports
- Dual channel (1 DIMM per channel) memory architecture
- Two DDR4 UDIMM (288-pin) sockets
- Supports PC4-25600 (DDR4-3200)
- Supports 4 GB, 8 GB, and 16 GB DDR4 UDIMMs
- Supports up to 4 GB on 32-bit systems
- Supports up to 32 GB (unbuffered) on 64-bit computers
From above info, it has 2 slots of RAM and machine already has 8 GB DDR4-2666 SDRAM (1 x 8 GB) therefore you can upgrade to
(a) 16GB: add same existing 8GB to slot 2 or using the following compatible RAM (will run at 2666MHz)
https://www.crucial.com/memory/ddr4/ct8g4dfra32a/ct18582717
or https://www.crucial.com/memory/ddr4/ct8g4dfra266/ct18576387
(b) 32GB (max): install 16GB each to both slots using the following compatible RAM (will run at 2666MHz)
https://www.crucial.com/memory/ddr4/ct2k16g4dfra32a/ct18676749
or https://www.crucial.com/memory/ddr4/ct2k16g4dfd832a/ct16192239
Regards.
cc
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
HP Recommended
The specs of your machine is
https://support.hp.com/au-en/document/c06448545
Its motherboard supports
- Dual channel (1 DIMM per channel) memory architecture
- Two DDR4 UDIMM (288-pin) sockets
- Supports PC4-25600 (DDR4-3200)
- Supports 4 GB, 8 GB, and 16 GB DDR4 UDIMMs
- Supports up to 4 GB on 32-bit systems
- Supports up to 32 GB (unbuffered) on 64-bit computers
From above info, it has 2 slots of RAM and machine already has 8 GB DDR4-2666 SDRAM (1 x 8 GB) therefore you can upgrade to
(a) 16GB: add same existing 8GB to slot 2 or using the following compatible RAM (will run at 2666MHz)
https://www.crucial.com/memory/ddr4/ct8g4dfra32a/ct18582717
or https://www.crucial.com/memory/ddr4/ct8g4dfra266/ct18576387
(b) 32GB (max): install 16GB each to both slots using the following compatible RAM (will run at 2666MHz)
https://www.crucial.com/memory/ddr4/ct2k16g4dfra32a/ct18676749
or https://www.crucial.com/memory/ddr4/ct2k16g4dfd832a/ct16192239
Regards.
cc
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community