Adjustable Stand / Arm / Mount for FreeSync M22F

[MrJZ]

I'm looking for any way to attach this FreeSync M22f monitor to a bracket / stand / arm etc so I can have adjustable height for it.  I'm having a bit of buyer's remorse getting a monitor that doesn't work w/ a VESA mount and not even realizing that it doesn't work w/ any VESA adapters.  Is there anything out there that can attach to this thing? 

[itsmyname]

@MrJZ -- this seems to be your monitor: HP M22f FHD Monitor - HP Store Canada

If all you want is vertical height adjustment, how about this:

   https://www.globalindustrial.ca/p/adjustable-monitor-stand-heavy-duty-15w-x-12d-black

Depending on the length of the 3 "legs" of your monitor stand, you may want to put a large sheet of plywood on top of this "riser".

[MrJZ]

Unfortunately all those risers have too large of a footprint and they're not easily height adjustable while in use. 

[itsmyname]

@MrJZ -- I would have thought that the platform was not large enough to place the feet of the stand on it. That is why I suggested a board between the top of the platform and the feet of the stand.

The vertical posts are made with multiple sections, so that you can "stack" 2 or 3 sections, to make adjustments.  How often are you going to adjust the height of the stand? Do you use a "computer gaming chair" that is height-adjustable, in smaller increments?

[MrJZ]

Thanks, but the riser isn't an option.