cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Jonathon33
Level 2
17 12 1 4
Message 1 of 2
294
Flag Post

Solved!

CPU bracket screw thread size

HP Recommended
TP01-0066

I went to go in to add a fan hub and upgrade my CPU Cooler with a Big SHURIKEN 3, for AMD the SHURIKEN shouldn't need anything but some rubber grommets, and the included screws and hardware. But to my dismay the motherboard has a Intel cpu cooler mount. So I wanted to try and use the intel adapters they fit issue is that the included screws did not thread into the cpu bracket. So I decided that I would take out the mobo and install the included intel bracket but then again another surprise can't remove it. So I was wondering if anyone has the thread size and pattern so I can buy aftermarket screws for the bracket.

When I reinstalled the stock cooler with new paste it preforms around 10 degrees cooler 80, but i was hitting 90  if I didn't go in and run manual voltage and clock speed before, which is why I was upgrading.

1 ACCEPTED SOLUTION

Accepted Solutions
Jay_G24
HP Support Agent
HP Support Agent
15,273 15,234 1,223 1,385
Message 2 of 2
Flag Post
HP Recommended

Hi @Jonathon33,

 

As this is a hardware issue, I'd suggest you contact HP support in your region regarding the service options for your printer/ computer.

 

Follow the instructions below to reach them:

 

1) Click on this link - https://support.hp.com/us-en/contact-hp

2) Select your product type below.

3) Enter the serial of your device. 

4) Select the country from the drop-down. 

5) Select the chat or get phone number options based on your preferences. 

6)Fill the web-form and proceed further.

 

If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile Name, you should see a little blue envelope, please click on it.  

 

Have a great day! 

And, Welcome to the HP Support Community. 

 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

View solution in original post

Tags (1)
Was this reply helpful? Yes No
1 REPLY 1
Jay_G24
HP Support Agent
HP Support Agent
15,273 15,234 1,223 1,385
Message 2 of 2
Flag Post
HP Recommended

Hi @Jonathon33,

 

As this is a hardware issue, I'd suggest you contact HP support in your region regarding the service options for your printer/ computer.

 

Follow the instructions below to reach them:

 

1) Click on this link - https://support.hp.com/us-en/contact-hp

2) Select your product type below.

3) Enter the serial of your device. 

4) Select the country from the drop-down. 

5) Select the chat or get phone number options based on your preferences. 

6)Fill the web-form and proceed further.

 

If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile Name, you should see a little blue envelope, please click on it.  

 

Have a great day! 

And, Welcome to the HP Support Community. 

 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

View solution in original post

Tags (1)
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation