Cable P/N for HP LSI 9217-4i4e SAS card?

[wny2016]

Spinning my wheels on this. I have a HP LSI 9217-4i4e SAS adapter in my (new to me) Z440. I can't for the life of me find the correct internal cable to hook up my four SAS drives. The SAS card only has a single connector at the back, as far as internal connectors go; although new, it didn't come with any cabling.

I obviously need a "breakout" cable: male SAS that plugs into the end of the controller card, ending on the other side in 4x mini-SAS to plug into the drives. All I can find is miniSAS to 4x SATA adapter cables. The LSI documentation doesn't list any part numbers at all. Obviously, this is a widely-used part. Can anyone tell me what it is and where to get it? I'll bet there are a zillion of them out there... Years ago I used LSI SAS cojntrollers that had 4x miniSAS plugs onboard. All you needed to was plug in a cable that had 4x miniSAS on one end to go onto the board, and 4x combined power/SAS connectors to plug into the drives. More generic, I guess, than the more modern cards, for internal cables.

[wny2016 · Accepted solution]

Of course, a few seconds after posting this I found the answer: The cable is SFF8087 to 4x SFF8482, and as I suspected, is commonly available.