cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
Level 20
Level 20
120,122 110,302 17,583 26,884
Message 21 of 125
Flag Post
HP Recommended

It will have to be, as I don't know of any other options you have.

Highlighted
Level 2
28 27 0 1
Message 22 of 125
Flag Post
HP Recommended
As you recommended, I purchased the SL9QQ, for £22, which is approxiametly $34, that was the cheapest I could find in the UK, apparently it comes with some thermal grease as well which is also good.

So I do not need to purchase a new heat sink then.

I was very close to purchasing the SL9QB, but I saw in your forum that the SL9QQ, was the top of the range.

One last question I cant get my head around is, Why is it not possible to install a C2D into the motherboard of the DC7600?
Highlighted
Level 20
Level 20
120,122 110,302 17,583 26,884
Message 23 of 125
Flag Post
HP Recommended

Hi:

 

Just clean the top of the processor and the bottom of your heatsink with alcohol to get rid of the old thermal paste, and put a nice application of new thermal paste on. You can use coffee filters too for cleaning instead of a lint free cloth, if you have any of those around.

 

Watch this video.

 

http://www.bing.com/videos/search?q=how+to+apply+thermal+compound+to+processor&mid=AC12B990C59B3FC70...

 

While the 945 chipset supports some C2D processors, HP must have restricted them from the BIOS so you would have to buy the dc7700.  :generic:

 

You can read this thread from the HP business support forum where some folks tried and failed.

 

http://h30499.www3.hp.com/t5/Business-PCs-Deskpro-EVO/dc7600-cmt-cpu-upgrade/m-p/835120#M61965

 

Please post back and let us know how your processor upgrade went.

 

Regards,

 

Paul

Highlighted
Level 2
28 27 0 1
Message 24 of 125
Flag Post
HP Recommended

Thank you very much Paul, You have been very helpful. 

I will be definatly be replying back on how the upgrade went.

0 Kudos
Highlighted
Level 20
Level 20
120,122 110,302 17,583 26,884
Message 25 of 125
Flag Post
HP Recommended

You're very welcome.

Highlighted
Level 2
28 27 0 1
Message 26 of 125
Flag Post
HP Recommended

Sorry, but what is meant by a "microde update"?,

 

Just to make sure, This is what I have to do?

 

Install latest Bios,

Install Processor with thermal grease

0 Kudos
Highlighted
Level 20
Level 20
120,122 110,302 17,583 26,884
Message 27 of 125
Flag Post
HP Recommended

Glad you asked...

 

Run the microcode update first, then update the BIOS.

Highlighted
Level 2
28 27 0 1
Message 28 of 125
Flag Post
HP Recommended
Can the microcode update be run while in windows 7?
0 Kudos
Highlighted
Level 2
28 27 0 1
Message 29 of 125
Flag Post
HP Recommended
http://support.microsoft.com/kb/2493989

will this update be fine?
0 Kudos
Highlighted
Level 20
Level 20
120,122 110,302 17,583 26,884
Message 30 of 125
Flag Post
HP Recommended

Hi:

 

You can only use this microcode update...

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

 

You have to use a bootable usb flash drive.

 

I am going to make this easy for you...

 

1. Get a USB Flash drive.

 

2. Download the 3 zip files I uploaded below.

 

3. Unzip the files and store them in a folder you can name for this project.

 

4. Insert a USB flash drive in your PC. Your windows 7 PC will be fine.

 

5. Run sp27608 and follow the instructions. This will make your USB flash drive bootable.

 

6.  Now, copy the DOS System files onto the flash drive

 

7. Copy the Flashbin files onto the flash drive.

 

8.  Reboot the PC, and at the beginning of the HP welcome screen, tap the F9 key to get the one time boot menu.

 

9.  Select the USB flash drive.

 

10. The PC should boot from the flash drive and bring you to a command prompt.

 

11. At the command prompt type: Flashbin.exe

 

12.  Follow the prompts to update the microcode.

 

When you're done, you can reformat the flash drive if you want.

 

Paul

 

 

Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation