cancel
Showing results for 
Search instead for 
Did you mean: 
Level 17
Level 17
46,704 40,965 4,447 11,583
Message 121 of 125
1,449
Flag Post
HP Recommended

Solved!

DC7600 CPU Upgrade

Your English is better than my Dutch. 😉   I make mistakes in it as well.

 

You may find the microcode at Intel. HP did not provide it. Do a Google search for it.

 

There is apparently no BIOS support for the current stepping code for the Pentium D-925. It will eventually crash the operating system if you cannot update it. That would not be a good thing. 

 

When overclocking in the past, I learned the hard way that jacking up the speed of the bus clocks and the CPU clock has a nasty tendancy to do that as well.




Post any other questions you have in your thread.
You can click on accept as solution if my post or reply was the information you needed to resolve your issue.
You can say thanks for my response by clicking on the blue thumbs up.
Reply
0 Kudos
odvl2011
Level 1
7 7 0 0
Message 122 of 125
1,446
Flag Post
HP Recommended

Solved!

DC7600 CPU Upgrade

but in fact the Pentium D-950 support. Pentium D 925-less speed than the Pentium D-950. What could be the reason?

Reply
0 Kudos
odvl2011
Level 1
7 7 0 0
Message 123 of 125
1,443
Flag Post
HP Recommended

Solved!

DC7600 CPU Upgrade

maybe I'm wrong?

Reply
0 Kudos
odvl2011
Level 1
7 7 0 0
Message 124 of 125
1,431
Flag Post
HP Recommended

Solved!

DC7600 CPU Upgrade

I set Pentium D-925. All run without error on BIOS 2.04.I wanted to upload a photo, but do not know how. Question: Do not update the BIOS to version 1.61 will hurt?

Reply
0 Kudos
Highlighted
odvl2011
Level 1
7 7 0 0
Message 125 of 125
1,417
Flag Post
HP Recommended

Solved!

DC7600 CPU Upgrade

I set the BIOS update to version 1.61. A Pentium-processor 925 is running. Computer Performance Evaluation increased Win7 from 3.2(P4-630) to 4.6(PD-925)/there was one problem: when the computer restarts, run the BIOS splash screen, a black screen appears. To kopyutera including the need to press the Power to turn off, and press it again to start the computer. this problem as 7600, and in 7700. Maybe someone knows why?

Reply
0 Kudos
Tags (1)
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation