• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP580-125RZ
Microsoft Windows 10 (64-bit)

HEY COMMUNITY. I NEED SOME ADVISE. MY DAUGHTERS GRAPHICS CARD FAN IS MAKING A LOT OF NOISE.  CLEANED THE INSIDE AND DID THE SUGGESTIONS ON THE SITE TO SEE IF THAT WOULD HELP, BUT NOPE!!!  ITS SOUNDING LIKE WE HAVE TO REPLACE THE GRAPHICS CARD. =(  RIGHT NOW HER COMPUTER HAS THE AMD RADEON RX 550, BUT WE WERE WANTING TO UPGRADE TO A 

XFX Radeon RX 580 DirectX 12 RX-580P8RFD6 8GB 256-Bit GDDR5 PCI Express 3.0 x16 CrossFireX Support Video Card

 DOES THE MOTHERBOARD HAVE THE RIGHT SLOT?

IF WE DO UPGRADE TO A 580 WILL WE ALSO NEED TO UPGRADE THE POWER SUPPLY?

WILL THE CARD FIT IN THE CASE?

LAST BUT NOT LEAST CAN THE CARD CONNECT TO THE MONITOR?

 

 

THANK YOU AHEAD OF TIME FOR YOUR ADVICE. 

I AM NOT SET ON THAT PARTICULAR CARD, BUT WOULD LIKE TO UPGRADE IF POSSIBLE.

 

1 REPLY 1
HP Recommended

@L2983,

Thanks for asking before purchase.

1) Measure the length of the present card, and what is still available. The RX 550 can vary from 5.5-7". The RX580 has different versions, double fan (9.3") and triple fan (11.7").  Picking an RX 580 with the same or close-to length is a "plus".

2) Yes, a new PSU. While a 500W is suggested,  IMHO a Corsair CX550 or CX550M is the choice. Perfect fit.

 

You will need to un-install the RX550 software and driver while its still in the unit, then power down.

Unplug power cord, open case, swap out cards. Swap out power supply. Connect cables.

Close case, reconnect power cord, re-boot, install RX580 software.

 

Note: Removing the PSU: Warning: do not randomly start unplugging cables. Follow each cable from the PSU to its end, only disconnect as you proceed. That will prevent disaster of what goes where.😢  You want to unplug the cables as you go thru the process. On the new PSU, it's the same, in reverse, but you'll add the power cable to the new GPU card.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.