cancel
Showing results for 
Search instead for 
Did you mean: 
NEKO51
New member
1 0 0 0
Message 1 of 2
495
Flag Post

HDD and DVD not running after installed SSD

HP Recommended
Pavillion 590-0066
Microsoft Windows 10 (64-bit)

The HP is my work computer. I did not like the speed so I updated the RAM to 16GB and installed a 256GB NVME drive in the slot. I cloned my HDD and then pulled SATA cable from HDD and it boots great.

I took HDD and formatted it in a SATA box. After reinstalling it the HDD will now power on and the DVD also does not show power.

 

Any help? I have tried the power cord being installed properly (it is, I have another unit of same model to verify.)

 

I tried to restore but nothing changed.

 

Thank you, NEKO51

1 REPLY 1
wb2001
Level 15
Level 15
12,842 12,628 1,774 5,020
Message 2 of 2
Flag Post
HP Recommended

@NEKO51,

2 different devices that are now without power ?  The only source of power is the 8 pin power cable at the motherboard.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation