HP Compaq 6200 Pro Small Form Factor PC Memory Upgrade

[GCRUZ0001]

Hi,

I would like to upgrade RAM from 8Gb to 16Gb. Can the HP Compaq 6200 Pro Small Form Factor PC support (2) 8Gb DIMMs?

Thanks,

G.

[Paul_Tikkanen · Accepted solution]

Hi:

Yes, the 6200 Pro can take up to 4 x 8 GB of memory.

System Memory Support
The HP Compaq 6200 Elite Series supports the 2nd generation Intel® Core™ processor family.

Based on a new PC microarchitecture, the processor is designed for a two-chip platform consisting of a processor and Platform Controller Hub (PCH).

Unlike previous generations, the processor includes an integrated memory controller (IMC). The IMC supports DDR3 protocols with two independent, 64-bit wide channels each accessing one or two DIMMs.
Two channels of non-ECC unbuffered DDR3 memory with a maximum of two UDIMMs per channel
Single-channel and dual-channel memory organization modes
Data burst length of eight for all memory organization modes
DDR3 memory data transfer rates of 1066 MT/s (PC3-8500) and 1333 MT/s (PC3-10600)
64-bit wide channels
DDR3 I/O voltage of 1.5V
Maximum memory bandwidth of 10.6 GB/s in single-channel mode or 21 GB/s in dual-channel mode assuming DDR3 1333
MT/s (PC3-10600)
The largest memory capacity possible is 32GB using four (4) 8GB DIMMs

This is the memory I used in my HP 6200 Pro MT.

Patriot PSD38G13332 Signature 8GB CL9 PC3-10600 1333MHz DIMM 8 DDR3 1333 Computer Internal Memory at...

[GCRUZ0001]

Thanks for the answer. Happy holidays!

[Paul_Tikkanen]

You're very welcome.

Happy Holidays to you too!