cancel
Showing results for 
Search instead for 
Did you mean: 
rswmercu82
New member
4 3 0 0
Message 1 of 7
522
Flag Post
HP Recommended

Solved!

HP ENVY Curved All-in-One - 34-b010 Upgrade 256 GB PCIe NVMe M.2 Solid State to to WD Black SN750

HP ENVY Curved All-in-One - 34-b010
Microsoft Windows 10 (64-bit)

Hello I recently bought a new Western Digital WD BLACK SN750 NVMe M.2 2280 1TB PCI-Express 3.0 x4 64-layer 3D NAND Internal Solid State Drive (SSD) WDS100T3XHC W/ Heatsink, but I can't find any support to install it, I hope someone here can help me with that. 

I've found some videos of similar computers on YouTube where it says that removing some screws from the base it can be done. But I am not sure if:

1.- The software is installed in the 256 GB PCIe NVMe M.2 Solid State or in the 1 TB Sata HD

2.- If the WD BLACK SN750 NVMe M.2 2280 1TB PCI-Express 3.0 x4 64-layer 3D NAND Internal Solid State Drive (SSD) WDS100T3XHC W/ Heatsink is compatible with the motherboard on this computer.

3.- If I can access to the module by just removing the base.

 

I'd appreciate your help

 

Thanks

6 REPLIES 6
Level 15
Level 15
21,628 21,252 2,444 8,111
Message 2 of 7
507
Flag Post
HP Recommended

Solved!

HP ENVY Curved All-in-One - 34-b010 Upgrade 256 GB PCIe NVMe M.2 Solid State to to WD Black SN750

@rswmercu82 , welcome to the forum.

 

There is a letter/s at the end of the model of your computer, such as, cn, a, nl, etc.  I need this letter/s to review the specifications.

-----------------------------------------
Signature:

HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)

Custom build: Corsair 750D Airflow (Full Tower); MSI MEG z390 ACE; i9-9900K processor (OC'd 5.025); Corsair H150i cooler; 32 GB Corsair Vengeance Pro 3200 memory; MSI RTX 2080 Gaming X Trio video card; Samsung 970 Pro 512 GB; Samsung 860 EVO 1 TB

HP Spectre 360 Convertible; i7-7560U; 16 GB memory; Intel® Iris™ Plus Graphics 640; 512 GB PCIe® NVMe™ M.2 SSD; 13.3" diagonal 4K UHD UWVA eDP BrightView WLED-backlit multitouch-enabled edge-to-edge glass (3840 x 2160); Windows 10 Pro 64 with Windows Ink

HP Photosmart 7520 AIO

++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**

Intelligence is God given; Wisdom is the sum of our mistakes!

___________________________
I am not an HP employee.
rswmercu82
New member
4 3 0 0
Message 3 of 7
428
Flag Post
HP Recommended

Solved!

HP ENVY Curved All-in-One - 34-b010 Upgrade 256 GB PCIe NVMe M.2 Solid State to to WD Black SN750

Hello, 

thanks for your help, the model is:

Z5L85AA

Reply
0 Kudos
rswmercu82
New member
4 3 0 0
Message 4 of 7
421
Flag Post
HP Recommended

Solved!

HP ENVY Curved All-in-One - 34-b010 Upgrade 256 GB PCIe NVMe M.2 Solid State to to WD Black SN750

Hello, 

thanks for your help, the model is:

Z5L85AA#ABACaptura de Pantalla 2019-12-02 a la(s) 15.44.53.png

Reply
0 Kudos
Level 15
Level 15
21,628 21,252 2,444 8,111
Message 5 of 7
399
Flag Post
HP Recommended

Solved!

HP ENVY Curved All-in-One - 34-b010 Upgrade 256 GB PCIe NVMe M.2 Solid State to to WD Black SN750

Thank you for the additional information, @rswmercu82!

 

Q:  1.- The software is installed in the 256 GB PCIe NVMe M.2 Solid State or in the 1 TB Sata HD

A:  If you are talking about the cloning software provided by WD, it will have to be installed on your current 256 GB M.2.  Therefore, you should probably buy a USB PCI Express M.2 enclosure.  The one in my link is a bit expensive, but it will give you an idea of what you need.  I did a chat with StarTech's Tech Support to assure that their product would work.  They assured me that it is exactly what you need.  This is the best way to clone your boot M.2 to the new M.2, SSD.  Once the drive has been cloned to the new drive, you can shut down the computer and install the new drive.  You can install the current M.2 in the enclosure and use it for storage once the computer boots from the new drive.

 

Q:  2.- If the WD BLACK SN750 NVMe M.2 2280 1TB PCI-Express 3.0 x4 64-layer 3D NAND Internal Solid State Drive (SSD) WDS100T3XHC W/ Heatsink is compatible with the motherboard on this computer.

A:  As far as I can tell it should be compatible.  Here is the Motherboard Specifications for the computer.  If you look at the diagram of the board it shows where the M.2 socket is located.

 

Q:  3.- If I can access to the module by just removing the base.

A:  I believe this is way to do it.  HP doesn't provide any instructions for this procedure.  Most likely because they consider it not to be an owner upgrade.  You may find a video online that will help you.

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

-----------------------------------------
Signature:

HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)

Custom build: Corsair 750D Airflow (Full Tower); MSI MEG z390 ACE; i9-9900K processor (OC'd 5.025); Corsair H150i cooler; 32 GB Corsair Vengeance Pro 3200 memory; MSI RTX 2080 Gaming X Trio video card; Samsung 970 Pro 512 GB; Samsung 860 EVO 1 TB

HP Spectre 360 Convertible; i7-7560U; 16 GB memory; Intel® Iris™ Plus Graphics 640; 512 GB PCIe® NVMe™ M.2 SSD; 13.3" diagonal 4K UHD UWVA eDP BrightView WLED-backlit multitouch-enabled edge-to-edge glass (3840 x 2160); Windows 10 Pro 64 with Windows Ink

HP Photosmart 7520 AIO

++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**

Intelligence is God given; Wisdom is the sum of our mistakes!

___________________________
I am not an HP employee.
rswmercu82
New member
4 3 0 0
Message 6 of 7
363
Flag Post
HP Recommended

Solved!

HP ENVY Curved All-in-One - 34-b010 Upgrade 256 GB PCIe NVMe M.2 Solid State to to WD Black SN750

Thank you very much for your help, I appreciate it very much.

I will proceed as you described in your very clear and helpful description and let you know hot it worked when I'm finished.

Have a Great day!!

Reply
0 Kudos
Level 15
Level 15
21,628 21,252 2,444 8,111
Message 7 of 7
345
Flag Post
HP Recommended

Solved!

HP ENVY Curved All-in-One - 34-b010 Upgrade 256 GB PCIe NVMe M.2 Solid State to to WD Black SN750

You are very welcome, @rswmercu82!  I am always glad to help.

 

I would appreciate hearing how it all works out.

-----------------------------------------
Signature:

HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)

Custom build: Corsair 750D Airflow (Full Tower); MSI MEG z390 ACE; i9-9900K processor (OC'd 5.025); Corsair H150i cooler; 32 GB Corsair Vengeance Pro 3200 memory; MSI RTX 2080 Gaming X Trio video card; Samsung 970 Pro 512 GB; Samsung 860 EVO 1 TB

HP Spectre 360 Convertible; i7-7560U; 16 GB memory; Intel® Iris™ Plus Graphics 640; 512 GB PCIe® NVMe™ M.2 SSD; 13.3" diagonal 4K UHD UWVA eDP BrightView WLED-backlit multitouch-enabled edge-to-edge glass (3840 x 2160); Windows 10 Pro 64 with Windows Ink

HP Photosmart 7520 AIO

++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**

Intelligence is God given; Wisdom is the sum of our mistakes!

___________________________
I am not an HP employee.
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation