-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Re: HP Envy 795-0030qd 3.5 inch sata tray caddy

Create an account on the HP Community to personalize your profile and ask a question
09-09-2018 02:02 PM
Between the generous assistance of @chrisocowan and @Savism there is community team work. Now we collectively have more answers than questions.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
10-26-2018 06:52 PM
So I just got the same model and I have been following this forum religiously. I have the screws for the HDs but now how are any of you powering the drives? I cannot figure out how to power them at all. I have seen people say that there is a proprietary 6pin connector but it is not available for the US right now. So are you guys using some third party cables to power your drive or what?
Thank you
10-28-2018 11:42 AM
Still need a clear picture of the 6 pin connector (without shadows).
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
02-24-2019 02:59 PM - edited 02-24-2019 03:01 PM
So, I cobbled together a working cable by ordering a similar Dell cable off of Amazon and rewiring/soldering. However, myself and another person on this forum, had two different models of Envy 795 (I have a 40xt) and we arrived at a different Pinouts using volt meters. (This worries me a bit, before giving out this advice as generic for all Envy 795 models)
I started out my journey by calling HP Support, and the Parts dept (after contacting a supplier). None of these people could help me. I begged for Technical details on the board, and an availability date for the P/N. I occassionally log on to part-surfer to see if it is avail. No new news.
I found a European based store on eBay that claimed to be able to get the part. Only thing is they wanted $50 up front with no delivery date. Needless to say, I didn't pull the trigger on that purchase.
@papawupa wrote:Has there been any resolution to how to power an additional sata data drive? Need to know if there is a power cable available from hp or some third party vendor.
02-24-2019 06:09 PM
Here is a clear picture (so far offered) of the motherboard header and some discription of the pin blockers.
No one stocks it in the USA, and I doubt any company would try to create the pin, as it's property of Dyson.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
- « Previous
- Next »