Solved: HP Pavilion 550-254na won't boot (and beeps) after adding 2x... - HP Support Community

Matty_N · ‎04-03-2020

I recently purchased 2 sticks of dual 8gb Corsair Vengeance Pro Series RAM, but when I installed them into my motherboard and tried to boot the PC it didn't and began beeping at me. I couldn't work out the pattern of beeps and wasn't able to enter my BIOS either. When buying the RAM I checked that my motherboard supported 16GB of DDR3 Ram at 1600hz (which is what the new Corsair RAM is) Is my RAM compatible and will I need to buy new RAM... Please Help!!!

wb2001 · ‎04-04-2020

@Matty_N,

That is why it failed. Same specifications do not make it work. Components are made to specific computer models. Here is the Crucial page, and look for the numbers, example "CT2K102464BD160B" if your going to search the Amazon. PS<> Corsair Vengeance Pro Series RAM is not compatible with your unit.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

View solution in original post

wb2001 · ‎04-03-2020

@Matty_N,

RAM modules are specific to a computer. How did you pick these?

Did you go to Corsair site and input your computer model?

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

Matty_N · ‎04-04-2020

I went to https://www.mrmemory.co.uk/memory-ram-upgrades/hp/pavilion-desktop/550-254na to find an upgrade and looked at the specifications of the recommended RAM, I had also heard that Corsair RAM was very good value so found the COrsair RAM with the same specifications and bought the Corsair RAM from Amazon. I was under the assumption that most RAM was universal as there was no documentation on the Amazon page (or on the box) that said/says that this RAM is computer specific.

wb2001 · ‎04-04-2020

@Matty_N,

That is why it failed. Same specifications do not make it work. Components are made to specific computer models. Here is the Crucial page, and look for the numbers, example "CT2K102464BD160B" if your going to search the Amazon. PS<> Corsair Vengeance Pro Series RAM is not compatible with your unit.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

Matty_N · ‎04-05-2020

Ah, ok then. Thanks so much for your help👍

HP Pavilion 550-254na won't boot (and beeps) after adding 2x8GB Corsair Vengeance Pro Series RAM

Create an account on the HP Community to personalize your profile and ask a question