HP Pavilion 570 P065 power supply upgrade.

87fiero · ‎10-04-2018

I would like to upgrade my power supply to at least 300 / 400 w. There are a lot of power suppliers out there but they don't show what is compatible.

Has anybody upgraded ? If so, maybe you can help with wattage , brand , etc. Thanks !

Grzwacz · ‎10-04-2018

Greetings,

Welcome to the forum.

I am not a HP employee.

Can't find your PC using 570-P065. Don't know what PSU HP has included with your system.

Measure your existing PSU. Standard ATX PSU dimensions are around: 5.9" x 5.5" x 3.4". SFF PSUs are designed for use in Micro ATX or Mini ATX cases.

Higher wattage PSUs are usually a little longer.

Regards

wb2001 · ‎10-04-2018

@87fiero,

If that is an HP 570-p065SE unit, it has an 180W standard ATX PSU. The motherboard is the Lubin. That will present a problem unless you keep any new graphic card the same length, or not to exceed the measured length from the expansion rail to the power supply cabling. Longer dual width cards will not seat because these slam into the wiring and 24 pin header.

If you can mantain your zeal, and purchase a short card, the Corsair CX500 or 550 PSU is an exact fit.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

Grzwacz · ‎10-04-2018

Hi,

The Lubin MB is not an easy graphics card upgrade. Very tight fit with connectors and wiring.

Regards

87fiero · ‎10-05-2018

WB2001 has the correct pc. But for some reason the issue is wrong. My issue is the POWER supply . I want to upgrade the power supply. At this time I only want to upgrade the power supply. I am looking for information about what type / brand of power supply is compatible with my HP 570-p065SE computer with a Lubin motherboard

Grzwacz · ‎10-06-2018

Hi 87fiero,

Please measure the existing PSU (LxHxW).

Also check clearance around the existing PSU. You can't install a six inch widget in a four inch space.

A SFF PSU may work in your system.

Do you realize how hard it is to help when one does not know the existing PSU dimensions? Very hard to work in a vacuum!

Your motherboard is 20.5x22.0 cm (8.1x8.7 in).

This is not a uATX motherboard. Your chassis may be a mini ATX chassis. Or the chassis may be a HP proprietary chassis??

We can't help you if you don't help us.

I don't have your HP PC in my possession. I have no knowledge of your PC's current PSU dimensions or what size PSU can be installed in your PC.

Regards

87fiero · ‎10-06-2018

Forums !

I am ending my replies. Please don't continue. I will contact a PSU supplier and work with them. Thanks for your time.

wb2001 · ‎08-07-2019

This will address the issue.

The actual PSU in the HP 570 is a standard ATX,

This was verified within this other posting/reply.

Sometimes it is difficult to work within the information offered by the request.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

Create an account on the HP Community to personalize your profile and ask a question