cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Rip181
New member
4 2 0 0
Message 1 of 2
167
Flag Post

Having to boot Twice to get into Windows after NVMe Install

HP Recommended
HP 860-010
Microsoft Windows 10 (64-bit)

I Just upgraded the 128 Gig SSD with a 500 Gig NVMe Samsung 970 Evo Plus Drive. I did a Fresh install of windows and windows runs fine but if I restart after the boot screen it will lock before the windows screen and I will have to it the power button to turn it off then turn it back on for it to boot into windows. 

 

Anyone know why it will not boot into windows on a restart?

1 REPLY 1
Rip181
Author
New member
4 2 0 0
Message 2 of 2
Flag Post
HP Recommended

Well I got it to boot after a restart Finally (I reset the Bios and then Disabled Secure boot and enabled Legacy) but now the Nvidia Graphics Card says no boot to install the PCIe Power which it is. the only way to get it to boot now is to remove the Graphics card and use Integrated. I can not for the life of me find a setting the bios to enable dedicated graphics in lieu of integrated thinking that's the issue but I don't know. I did not touch the graphics card and now it wont work. even if I change it back to secure boot.

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation