-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- How to remove the rear cover of my HP XA0053W

Create an account on the HP Community to personalize your profile and ask a question
02-18-2019 02:01 PM
I want to add an 8GB memory module and need to know how to get the rear cover off. Documents from HP show a similar All In One, but it has 2 screws on the bottom of the base. Mine only has a serial # and model # tag in the center of the bottom of the base.
Solved! Go to Solution.
Accepted Solutions
02-18-2019 02:22 PM - edited 02-18-2019 02:32 PM
Welcome to the HP Support Community @tidwood
Is this the same???
HP Pavilion All in One 24-xa0000 CTO - FRU Remove/Replace Videos:
https://h20574.www2.hp.com/results.htm?SID=1009924189&MEID=3A3C3EA7-386A-4F96-8833-E28061E18E2A
Click on Stand then I/O Ports Rear Cover:
Upgrading and Servicing Guide:
http://h10032.www1.hp.com/ctg/Manual/c06111214
REO
02-18-2019 02:22 PM - edited 02-18-2019 02:32 PM
Welcome to the HP Support Community @tidwood
Is this the same???
HP Pavilion All in One 24-xa0000 CTO - FRU Remove/Replace Videos:
https://h20574.www2.hp.com/results.htm?SID=1009924189&MEID=3A3C3EA7-386A-4F96-8833-E28061E18E2A
Click on Stand then I/O Ports Rear Cover:
Upgrading and Servicing Guide:
http://h10032.www1.hp.com/ctg/Manual/c06111214
REO
02-18-2019 02:36 PM
Thank you for the advice and link. The problem I have is that when looking at the bottom of the base there are NO screws.The only thing on the base is a retangular tag that has the Model # and Serial #. Based on your information and the information on :http://h10032.www1.hp.com/ctg/Manual/c06111214, I am guessing that the tag needs to come off and that the screws are under the tag. So far no one at HP support knows, all they can say is to take to an actual human technician.
02-18-2019 04:08 PM
Good news and bad news. The 2 screws were under the label. Got the cover off, EMI shield off and put new memory card into unsed slot. Closed up everything without losing a single screw, only to not see the new 8GB of RAM. 😞 No error messages, nothing. PC booted right up and seems to be working fine. When I look at the system, it only shows the 4GB that it came with. Thank you for all your advice.
02-18-2019 04:13 PM
Start a new post here about your upgrade.
https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/bd-p/HardwareDPC
REO