cancel
Showing results for 
Search instead for 
Did you mean: 
aDeplorable
New member
2 0 0 0
Message 1 of 2
117
Flag Post

I want to add RAM

HP Recommended
OMEN by HP Obelisk Desktop PC 875-0000a
Microsoft Windows 10 (64-bit)

I would like to add RAM to my computer.

It has 1 x 16gb chip.

I see 1 additional slot available.

Can I add another 16gb chip and have 32gb RAM.

also, could I replace the existing 16gb chip with a 32gb chip and add a 2nd 32gb chip for a total of 64gb RAM?

if so how much would each cost?  16gb = $??       32gb = $??

1 REPLY 1
Grzwacz
Level 12
Level 12
6,786 6,769 639 1,531
Message 2 of 2
Flag Post
HP Recommended

HI,

 

Using 875-0000a shows three possible motherboards.

 

All motherboards (MB) have the following memory upgrade specs:

 

  • Dual channel (1 DIMM per channel) memory architecture
  • Two DDR4 UDIMM (288-pin) sockets
  • Supports PC4-21300 (DDR4-2666)
  • Supports 8 GB and 16 GB DDR4 UDIMMs
  • Supports up to 4 GB on 32-bit systems
    NOTE: 
    32-bit systems cannot address a full 4.0 GB of memory.
  • Supports up to 32 GB (unbuffered) with 16 GB DIMMs on 64-bit computers.
    NOTE: 
    Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

 

You can add one more 16 GB memory module. Per HP, this MB does not support 32 GB memory modules.

 

Cost can vary. Crucial Memory (Link) is usually compatible with HP MBs

 

Regards

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation