-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Re: Maximum RAM capability

Create an account on the HP Community to personalize your profile and ask a question
07-04-2017
04:28 PM
- last edited on
07-04-2017
04:33 PM
by
Omar-E
The machine's specification is:
HP Compaq dc7900 Ultra slim Desktop
d7900eU/E8400/160hq/2T/16rk UK
hp s/n: [personal information removed]
p/n: FU039ET#ABU
2.00GB Single-Channel DDR2 @ 398MHz (6-6-6-18)
There are apparently two sockets for RAM. I would like to increase RAM to the maximum acceptable.
Can someone tell me please?
Thank you
Equal opportunities for equal abilities.
Solved! Go to Solution.
Accepted Solutions
07-04-2017 06:09 PM
Respected brands are Crucial, Kingston, G.Skill, Patriot.
Those are the only brands I have used, and never had any problems with any of those manufacturers.
There may be other decent brands too, but the above 4 are probably the most popular and affordable.
Can't tell you which ones to avoid but if you are really thinking about upgrading to 8 GB, then plan to pay around $175 for a pair new.
https://www.newegg.com/Product/Product.aspx?Item=N82E16820231293
You could get a used HP 8000 Elite USDT for less than that, and it uses the much faster and less expensive DDR3 memory.
07-04-2017 04:46 PM
Hi:
Below is the link to the quickspecs for that model.
http://images10.newegg.com/UploadFilesForNewegg/itemintelligence/HP/13029_ca1400426016556.PDF
Memory upgrade info can be found on page 12. 2 x 4 GB is the max (8 GB ttl).
http://images10.newegg.com/UploadFilesForNewegg/itemintelligence/HP/13029_ca1400426016556.PDF
The problem is that you will find that a 4 GB PC2-6400 memory module is very expensive nowadays.
07-04-2017 05:15 PM
Thank you Paul for your quick reply.
I must admit that I'm a bit confused by the different notations. What's the relation between DDR2 SYNCH DRAM using SO-DIMM, and PC2-6400 memory?
Equal opportunities for equal abilities.
07-04-2017 05:25 PM
You're very welcome.
DDR2 SYNCH DRAM using SO-DIMM, refers to the form factor of the memory.
SO-DIMM memory is used in notebook PC's, and a few desktop PC's, such as the dc7900 USDT
PC2-6400 refers to the speed at which the memory runs.
So, you need PC2-6400 SO-DIMM memory modules for the USDT model.
Representative picture of a SO-DIMM memory module...
Representative picture of memory used in most desktop PC's (except the USDT form factors).
07-04-2017 06:09 PM
Respected brands are Crucial, Kingston, G.Skill, Patriot.
Those are the only brands I have used, and never had any problems with any of those manufacturers.
There may be other decent brands too, but the above 4 are probably the most popular and affordable.
Can't tell you which ones to avoid but if you are really thinking about upgrading to 8 GB, then plan to pay around $175 for a pair new.
https://www.newegg.com/Product/Product.aspx?Item=N82E16820231293
You could get a used HP 8000 Elite USDT for less than that, and it uses the much faster and less expensive DDR3 memory.