cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Maconudos
New member
3 1 0 0
Message 1 of 3
608
Flag Post

Solved!

Memory Upgrade - RAM Speeds

HP Recommended
M01-F0016
Microsoft Windows 10 (64-bit)

I wanted to upgrade my memory because I heard AMD APUs work great with fast memory.  So I checked the motherboard specs for my M01-F0016 and purchased G.Skill Ripjaws V 3200 16GB.

 

I installed the memory and went to set the speed in the bios, but I found out HP doesn't allow that.  Someone on the board suggested AMD Ryzen Master to OC the memory, but I'm reading a lot of horror stories of people bricking their PCs with that software.  

 

Any other suggestions?  The memory is operating at 2133 MHz right now. 

1 ACCEPTED SOLUTION

Accepted Solutions
Prométhée
Level 16
Level 16
7,881 7,776 825 2,942
Message 2 of 3
Flag Post
HP Recommended

Hello

 

it is originally written:

8 GB DDR4-2666 SDRAM (1 x 8 GB)

 

and possible:

  • Dual channel (1 DIMM per channel) memory architecture
  • Two DDR4 UDIMM (288-pin) sockets
  • Supports PC4-25600 (DDR4-3200)
  • Supports 8 GB and 16 GB DDR4 UDIMMs
  • Supports up to 4 GB on 32-bit systems
    note:
    32-bit systems cannot address a full 4.0 GB of memory.
  • Supports up to 32 GB (unbuffered) on 64-bit computers
    note:
    Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

only, this usually requires the use of HP memory modules
There is no option in the bios, and indeed apart from what has already been proposed, either you try or you change memory modules

namely that "it is necessary to avoid mixing the HP modules and other ..
Sometimes you have to change everything at the same time

https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Ram-Speed-on-Erica-Motherboard/...

 

 


Please remember to mark the answers this can help other users
please click on the accept as solution button if message provided an answer to the problem >

was this reply helpful , or just say "thank you " ? Click on the yes button 
Warning
If you have to do certain manipulations, it is at your own risk, think carefully before acting!
If you don't think you can, get help, or go to a professional





Desktop-Knowledge-Base
happy New Year

View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2
Prométhée
Level 16
Level 16
7,881 7,776 825 2,942
Message 2 of 3
Flag Post
HP Recommended

Hello

 

it is originally written:

8 GB DDR4-2666 SDRAM (1 x 8 GB)

 

and possible:

  • Dual channel (1 DIMM per channel) memory architecture
  • Two DDR4 UDIMM (288-pin) sockets
  • Supports PC4-25600 (DDR4-3200)
  • Supports 8 GB and 16 GB DDR4 UDIMMs
  • Supports up to 4 GB on 32-bit systems
    note:
    32-bit systems cannot address a full 4.0 GB of memory.
  • Supports up to 32 GB (unbuffered) on 64-bit computers
    note:
    Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

only, this usually requires the use of HP memory modules
There is no option in the bios, and indeed apart from what has already been proposed, either you try or you change memory modules

namely that "it is necessary to avoid mixing the HP modules and other ..
Sometimes you have to change everything at the same time

https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Ram-Speed-on-Erica-Motherboard/...

 

 


Please remember to mark the answers this can help other users
please click on the accept as solution button if message provided an answer to the problem >

was this reply helpful , or just say "thank you " ? Click on the yes button 
Warning
If you have to do certain manipulations, it is at your own risk, think carefully before acting!
If you don't think you can, get help, or go to a professional





Desktop-Knowledge-Base
happy New Year
Was this reply helpful? Yes No
Maconudos
Author
New member
3 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Not the answer I was hoping for, but thank you.  

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation