cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Syed57
Level 1
3 2 1 0
Message 1 of 4
1,469
Flag Post

Solved!

Need help and steps for HP Z440 - Bios and Drivers upgrade

HP Recommended
z440
Microsoft Windows 8.1 (64-bit)

I am new to BIOS and drivers update process for my HP Z440 workstation. Kindly assist me in installing the latest BIOS and PC Drivers.

Syed57_0-1607571093126.png

 

 

I see lot of Drivers having issue on my workstation(Some are captured as below):

Base System Drivers:
--------------------
PCI\VEN_8086&DEV_2FB0&SUBSYS_2FB08086&REV_02
PCI\VEN_8086&DEV_2FB0&SUBSYS_2FB08086
PCI\VEN_8086&DEV_2FB0&CC_088000
PCI\VEN_8086&DEV_2FB0&CC_0880

PCI\VEN_8086&DEV_2F71&SUBSYS_2F718086&REV_02
PCI\VEN_8086&DEV_2F71&SUBSYS_2F718086
PCI\VEN_8086&DEV_2F71&CC_088000
PCI\VEN_8086&DEV_2F71&CC_0880

PCI\VEN_8086&DEV_2FAC&SUBSYS_2FAC8086&REV_02
PCI\VEN_8086&DEV_2FAC&SUBSYS_2FAC8086
PCI\VEN_8086&DEV_2FAC&CC_088000
PCI\VEN_8086&DEV_2FAC&CC_0880

PCI Device:
----------
PCI\VEN_8086&DEV_8D7C&SUBSYS_212B103C&REV_05
PCI\VEN_8086&DEV_8D7C&SUBSYS_212B103C
PCI\VEN_8086&DEV_8D7C&CC_FF0000
PCI\VEN_8086&DEV_8D7C&CC_FF00

Performance Counters:
---------------------
PCI\VEN_8086&DEV_2F37&SUBSYS_2F378086&REV_02
PCI\VEN_8086&DEV_2F37&SUBSYS_2F378086
PCI\VEN_8086&DEV_2F37&CC_110100
PCI\VEN_8086&DEV_2F37&CC_1101

SM Bus Controller:
-----------------
PCI\VEN_8086&DEV_8D22&SUBSYS_212B103C&REV_05
PCI\VEN_8086&DEV_8D22&SUBSYS_212B103C
PCI\VEN_8086&DEV_8D22&CC_0C0500
PCI\VEN_8086&DEV_8D22&CC_0C05

System Interrupt Controller:
---------------------------
PCI\VEN_8086&DEV_2F2C&SUBSYS_00008086&REV_02
PCI\VEN_8086&DEV_2F2C&SUBSYS_00008086
PCI\VEN_8086&DEV_2F2C&CC_080020
PCI\VEN_8086&DEV_2F2C&CC_0800

1 ACCEPTED SOLUTION

Accepted Solutions
Syed57
Author
Level 1
3 2 1 0
Message 2 of 4
Flag Post
HP Recommended
Was this reply helpful? Yes No
3 REPLIES 3
Syed57
Author
Level 1
3 2 1 0
Message 2 of 4
Flag Post
HP Recommended

Missing Drivers.png

Was this reply helpful? Yes No
savvy2
Level 7
1,432 1,058 40 105
Message 3 of 4
Flag Post
HP Recommended

why not forget BIOS, if the RTC battery is good so is BIOS leave it alone until boots fail ok>  your battery  and PC are near new.

w8 ?

so step one was skipped I see, no screen photo full shown. (to see the NIC ICON dead or good in task bar)

(THE NETWORK IS FIRST) on same DM screen click network.

first is internet connected,   is it? if yes all you do is click that first line of endless errors and right click update  that line.

my Z600 old as heck installs fast and clean  on w10 even the MS PNP works OOBE.  

 

sorry all I have are questions😁

you found this PC with w8 dead like this,  ? a wrecked install by someone else? or off what media (bad)

HOw did you find this PC like this (history)

this PC have old data not backed up or APPS expensive and no license saved?

for sure w8 was installed wrong, that is FOR SURE.!

why not do this,?

connect Ethernet cable to your router from this PC, DIRECT wired. CAT5/6 cable.

AND FRESH LOAD W10 FOR FREE, TO THIS pc, some PCs that are w8 PCs even free ACTIVATE To w10.

AND ALL that dead stuff seen there are working now.

just 1 step, put on w10  .  (came with w8 or w10 new ) is w10 is free, the license for w10 is stored in the BIOS.

 

btw all errors there 8086 means intel chip drives missing big time and mean the installer failed (person)

error one decodes to

Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 Thermal Control

 

that V3 Xeon E5 runs and loads clean on any  w7 ,w8 or w10 installer so is install.

or using bogus install media not from HP or not from Microsoft.com DIRECT.

that is it, just to a fresh install clean.

 

btw HP may have  clean w10  free install image just for you , ask, (outside my pay grade that)

NO warranty answers by me.
Was this reply helpful? Yes No
Syed57
Author
Level 1
3 2 1 0
Message 4 of 4
Flag Post
HP Recommended

Resolve the errors after downloading all the drivers from below link:

https://support.hp.com/ca-en/drivers/selfservice/hp-z440-workstation/6978828

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation