Need help with Thimphu-K Beep Codes

[Phenotis]

I recently bought a new case in hopes of using it as a platform for some future watercooling as I noticed lately the system would overheat when gaming.

I transferred everything over to the new case and plugged in what I think is the correct configuration for the headers but I can't get the motherboard to boot into BIOS. It gives me 3 long beeps followed by 2 short ones and I can't seem so find any of the beep codes for the Thimpu-K motherboard. I've checked to make sure the Ram is mounted correctly and everything else on the new case is plugged in the way it should be.

Any help would be appreciated.

[Grzwacz]

Greetings,

Welcome to the forum.

I am not a HP employee.

A 3:2 error code is a memory problem.

I would try reseating the memory. Or try one stick of memory at a time.

Regards

[Phenotis]

Thanks Grzwacz.

I think I've figured out the issue. It looks like during the case transfer and while messing around with the AIO cooler I bent some pins on the socket. Looks like the mobo is dead and I will need a new one.

[Grzwacz]

Hi Phenotis,

You're very welcome.

Sorry to hear that.

Regards