cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Jdub27
New member
2 0 0 0
Message 1 of 2
188
Flag Post

Solved!

RAM Slot

HP Recommended
HP Omen 870-224
Microsoft Windows 10 (64-bit)

My 1st RAM slot doesn't work but my 2nd slot does.  I tried inserting my current RAM stick and my newly purchased RAM stick in the slot, but my PC would power on and then beep 3 times, then 2 short times. However, both of my RAM sticks work in the 2nd slot. I'm currently using 8gb of RAM and I want to upgrade to 16gb, and my motherboard has 2 RAM slots. Any fixes?

1 ACCEPTED SOLUTION

Accepted Solutions
old_geekster
Level 16
Level 16
25,499 9,142 2,950 11,184
Message 2 of 2
Flag Post
HP Recommended

@Jdub27 , welcome back to the Community.

 

Did you have memory in Slot #1?  If so, it may have gotten damaged when removing or installing the stick.  The only thing that I will recommend is using canned air and gently blowing it into the slot to see if it will solve your problem.  Otherwise, you have done everything that you can do.  Memory slots are not normally user repairs.

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
old_geekster
Level 16
Level 16
25,499 9,142 2,950 11,184
Message 2 of 2
Flag Post
HP Recommended

@Jdub27 , welcome back to the Community.

 

Did you have memory in Slot #1?  If so, it may have gotten damaged when removing or installing the stick.  The only thing that I will recommend is using canned air and gently blowing it into the slot to see if it will solve your problem.  Otherwise, you have done everything that you can do.  Memory slots are not normally user repairs.

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation