RAM compatibility.

[Clipsguy]

My desktop came with the Samsung M378A1K43EB2-CWE 8GB DDR4 desktop memory (UDIMM) module running at 3200MHz.

I want to upgrade my desktop by adding an additional 8GB RAM stick to have 16GB (2x8GB) RAM running in dual-channel. However, because this is an HP desktop, I am concerned that not just any RAM will work. I checked on eBay, but the seller doesn't ship to where I live, unfortunately.

I found this RAM from a brand named DATO that is pretty close to the specifications of the Samsung RAM.

DATO DDR4 RAM 8GB 3200MHz, PC4-25600 CL22 1.2V 288-Pin Non-ECC unbuffered DIMM, Desktop Memory Module.

Link:
https://www.amazon.com/DATO-3200MHz-PC4-25600-288-Pin-Non-CC/dp/B0CHM6BMPW/ref=pd_ci_mcx_mh_mcx_view...

Will this RAM be suitable?

[Mr_RadhaTech · Accepted solution]

I hadn’t heard of DATO before either. It seems to be a lesser-known brand, but it appears to be legitimate, so it should be fine to buy. Specification-wise, it matches the Samsung factory RAM, so it should work. Just make sure to install it in the correct matching dual-channel slots as specified in the motherboard manual for the best performance.

It should be fine, but Since it’s not a major brand, I’d buy it from a seller with a good return policy and test it after installation.

[Clipsguy]

The link I showed you is the product on Amazon. The same product is being sold at my nearest tech store. They have a good return policy so if it doesnt work with my system then I can always refund it.

[Mr_RadhaTech]

Perfect, that's great. Buy it and enjoy it. Good luck!.