cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Lordofthejinx
New member
3 1 0 0
Message 1 of 2
236
Flag Post
HP Recommended

RAM not recognized

MS-7613 Inverness
Linux

Hi,

 

I am trying to upgrade the RAM on my system but the system does not boot when i install either 1 or both of the new RAMs. However if i use my old RAM it works like a charm. Can you please help me with this?

 

Motherboard :  MS-7613 Ver2.0

Slots: 2 Blue

BIOS Revision : 6.07 11/29/10

Core Version: 08.00.15

Old RAM: 2GB pc3 10600U

NEW RAM: 2x8GB DDR3 1600

 

I have tried 2GB pc3 10600U + 8GB DDR3 1600as well, but no luck.

 

I was hoping even if the new RAMs were higher clock , it would come down to the max supported by the board. please correct me if i am wrong and also help me understand the best practices for choosing a compatible RAM for a given Motherboard and CPU.

 

Thanks in advance.

 

1 REPLY 1
Level 15
Level 15
10,135 9,972 1,356 3,703
Message 2 of 2
69
Flag Post
HP Recommended

RAM not recognized

@Lordofthejinx,

Already answered, see here.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation