-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
Create an account on the HP Community to personalize your profile and ask a question
09-17-2020 11:08 AM
Hi
I have just purchased an SSD and located the socket for it. You have to remove the graphics board to access it easily.
However, there are 2 posts to secure the card at different spacings, I assume for different sized cards. The problem is, I do not have a bolt with the ludicrously small thread that is required. The card then sits at an angle , pushed into that position by the contacts in the socket So I suspect that if not secured, contact would be suspect.
The posts are labelled HS3 on the motherboard but I have no idea what size thread would fit that.
Anyone know?
Solved! Go to Solution.
Accepted Solutions
09-17-2020 11:10 AM
It is an M3 x 2.1 screw.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
09-17-2020 11:10 AM
It is an M3 x 2.1 screw.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Didn't find what you were looking for? Ask the community