Upgrade RAM for HP ProDesk 400 G4

[devildog66]

Looking to upgrade from 8GB RAM.  Will this PC support 16 GB (2x8GB) DDR4 modules?

[old_geekster]

@devildog66 , welcome to the forum.

What is the version of your computer; Desktop mini, Microtower or Small Form Factor?

[devildog66]

Hi, thanks.  It is a microtower.

[old_geekster]

You are welcome, @devildog66!

Here is the Product Specifications page for the computer.  If you look at the section titled "Memory" it states the the maximum memory is 64 GB.  However, I believe that the maximum should be 32 GB, since there is only 2 slots (2 banks of 1).  Also, it shows how to populate the slots with the different amounts.

Here is the memory that Crucial Memory recommends.  As you will see, Crucial/Micron states there are 2 slots (2 banks of 1), as well.  They state that the maximum is 32 GB, also.

If you decide to use Crucial's memory you may have to remove the current memory if it is not compatible.  You can contact Crucial's Tech Support for help.  They have always been very helpful.  I suggest using CPU-Z to check the brand and timings of the current memory.  This information can be found in the tab titled "SPD".

Note: If you want to increase the system performance even further, you can look at the SSD's that Crucial recommends.  I will never have another computer without a SSD boot drive.  They are very fast.

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.