• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
Envy Phoenix 860-020d
Microsoft Windows 10 (64-bit)

Hi, I am using hp envy phoenix 860-020d which shipped with 128GB SSD & 3TB HDD. 

I read that the motherboard is actually able to support additional SSD/HDD& i can see that there's one extra slot that is unused. However, when i contacted HP Cust Support, they informed me that my desktop does not support additional drive.

 

Has anyone tried installing additional drive? Will this work?

 

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@izzat94 wrote:

Hi Erico,

 

Thanks for the fast reply.

Is there any other way i can buy an additional hard disk power connectors for the PSU?

I'd like to avoid buying a new PSU if possible.

 

Thanks!


You will have to take a look  inside of the case to see what power connectors are available.

 

One thing to consider is the power connectors that are used with the optical disk drive.  

 

Personally, I no longer have much use for CDs or DVD disks.

 

I have a USB external optical disk drive for those times.  I put ISO files and music on USB flash drives.

 

If the SSD that you purchase has enough capacity, you can clone your boot disk to it. Once that is done, you can put it in the boot disk's position. That would take care of  the need for the PSU SATA power connector.

 



I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"



View solution in original post

4 REPLIES 4
HP Recommended

Sur.

 

The motherboard has four SATA ports and only three of them are in use.  

 

An SSD does not take up very much space.

 

You could actually use a piece of double-sided tape to secure it in place. 

 

If you have the original PSU, that may be a problem as there are not likely to be any extra hard disk power connectors inside the case. That can be resolved by replacing the PSU with an upgraded modular unit. Check out Corsair's offerings. It will need to be around 450 Watts or better.



I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"



HP Recommended

Hi Erico,

 

Thanks for the fast reply.

Is there any other way i can buy an additional hard disk power connectors for the PSU?

I'd like to avoid buying a new PSU if possible.

 

Thanks!

HP Recommended

@izzat94 wrote:

Hi Erico,

 

Thanks for the fast reply.

Is there any other way i can buy an additional hard disk power connectors for the PSU?

I'd like to avoid buying a new PSU if possible.

 

Thanks!


You will have to take a look  inside of the case to see what power connectors are available.

 

One thing to consider is the power connectors that are used with the optical disk drive.  

 

Personally, I no longer have much use for CDs or DVD disks.

 

I have a USB external optical disk drive for those times.  I put ISO files and music on USB flash drives.

 

If the SSD that you purchase has enough capacity, you can clone your boot disk to it. Once that is done, you can put it in the boot disk's position. That would take care of  the need for the PSU SATA power connector.

 



I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"



HP Recommended

@erico wrote:

@izzat94 wrote:

Hi Erico,

 

Thanks for the fast reply.

Is there any other way i can buy an additional hard disk power connectors for the PSU?

I'd like to avoid buying a new PSU if possible.

 

Thanks!


You will have to take a look  inside of the case to see what power connectors are available.

 

One thing to consider is the power connectors that are used with the optical disk drive.  

 

Personally, I no longer have much use for CDs or DVD disks.

 

I have a USB external optical disk drive for those times.  I put ISO files and music on USB flash drives.

 

If the SSD that you purchase has enough capacity, you can clone your boot disk to it. Once that is done, you can put it in the boot disk's position. That would take care of  need for the PSU SATA power connector.


Thanks Erico for your help!!

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.