• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Join the HP Community Solve‑a‑thon | Help Others & Share Your Solutions | Live on Zoom | 2:30 PM to 2:30 AM IST | Every Wednesday Click here to know more
HP Recommended
6005mt
Microsoft Windows 10 (64-bit)

wanting to use bluestacks but tips say to turn on virtualization technology but don.t see it in bios

5 REPLIES 5
HP Recommended

Hi:

 

See where the enable VT setting is located by looking at the F10 setup guide at the link below, page 8, under System Security.

 

http://h10032.www1.hp.com/ctg/Manual/c01870957

HP Recommended

Didn’t see it in instructions

HP Recommended

Page 8 under system security...near the bottom of the page...

 

Computer Setup (F10) Utility Guide HP Compaq 6005 Pro Business PCs

 

System Security (some models: these options are hardware dependent)


Data Execution Prevention (some models) (enable/disable) Helps prevent operating system security breaches.


Virtualization Technology (some models) (enable/disable) Controls the virtualization features of the processor. Changing this setting requires turning the computer off and then back on.


Embedded Security Device Support (some models) (enable/disable) Permits activation and deactivation of the Embedded Security Device. Changing this setting requires turning the computer off and then back on.


NOTE: To configure the Embedded Security Device, a Setup password must be set.


Reset to Factory Settings (some models) (Do not reset/Reset) Resetting to factory defaults will erase all security keys. Changing this setting requires turning the computer off and then back on.


CAUTION: The embedded security device is a critical component of many security schemes. Erasing the security keys will prevent access to data protected by the Embedded Security Device. Choosing Reset to Factory Settings may result in significant data loss.


OS management of Embedded Security Device (some models) (enable/disable) This option allows the user to limit operating system control of the Embedded Security Device. Changing this setting requires turning the computer off and then back on. This option allows the user to limit OS control of the Embedded Security Device.

 

HP Recommended

Found it thanks, said it was enabled but bluestacks says it isn’t, oh well.

HP Recommended

You're very welcome.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.