Create an account on the HP Community to personalize your profile and ask a question
06-19-2021 03:12 PM
Now, let's see if you can get the BIOS updated...
Go back and format your USB flash drive just by right clicking on it, select Format and format it with the FAT 32 file system.
Once that is done, copy the BIOS update files that I zipped up and attached below to the flash drive.
Remember...just the files in the folder, not the folder.
You should be an expert at this by now...😊
After you have copied the files to your blank, formatted USB drive, restart the PC and go into the BIOS again.
Follow those prompts in your screen shot...File>Flash System ROM>select the USB flash drive.
The PC should 'see' the BIOS files on the flash drive.
Follow the onscreen instructions to update the BIOS, and let's hope that gets your P D 945 to work without the microcode error message.
06-19-2021 04:16 PM
HI Sorry for the delay in reply again, JUST had to go Change my Onezies!!! LOL Paul! Thaaaaaaaaaaaaaaaaaaaaaaaaaat DID IT!!!!!!! 😂 😃 😁
So,, What ever missing file was in the SP44223 file?,,, Anyway,, I have restarted the computer, and it is working great!!!!! 🙂 No F1 boot up error message just straight into windows 7!
Paul!, I cannot thank you enough! If there was some way I could buy you a Beer,, we would truly be having a few. You are AWE SOME! Thank yo u for not giving up and sticking with me!,, Not too many guys would do that for sure.. I am FlabberGasted and over come with Joy! 😃 Truly thank you from the Bottom of my Heart!