-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- where to get replacement CD burner / DVD drive for HP Elite ...

Create an account on the HP Community to personalize your profile and ask a question
04-28-2022 12:42 AM
The CD burner in my HP Elite 8200 SFF desktop is no longer burning reliably. I suspect the laser is going out.
Any suggestions on where to procure a replacement CD burner (that's also a DVD reader)?
This machine is running Win 7 Pro, and I use Nero to burn CD's.
Thanks in advance!
-Ted
Solved! Go to Solution.
Accepted Solutions
04-28-2022 07:19 AM
Hi, @navaho42
I have two HP 8200 Elite CMT's and here are the eBay listings for the OEM DVD-RW drives that came with the model...
04-28-2022 05:32 AM
I appears that it is just a normal 5.25" DVD/CD drive. Very common to replace with most any 5.25" SATA DVD/CD drive.
Here are some examples:
https://www.newegg.com/p/pl?N=100007589%20600012001
OR
https://www.amazon.com/Internal-DVD-Drives/b?node=172480
I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the "Was this reply helpful" Yes button.
04-28-2022 07:19 AM
Hi, @navaho42
I have two HP 8200 Elite CMT's and here are the eBay listings for the OEM DVD-RW drives that came with the model...
04-30-2022 06:26 PM
Hi Paul,
Awesome, thanks for that eBay link! I just ordered one.
One last question, if you don't mind...
I tried removing the OEM DVD-RW from my HP 8200 Elite CMT and ran into a roadblock. I pushed the green lever and was able to pivot the DVD-RW out of the chassis, but then got stuck. It appears there are 4 screws in the side that glide in grooves, so after unplugging the power and signal cables it should just slide out. But it didn't. Is there a button or lever somewhere that needs to be pressed?
Best,
-Ted
04-30-2022 08:36 PM
You're very welcome.
It's been a while since I played with mine, and the procedure is different on the CMT.
I recommend that you read the service manual for the instructions to remove the DVD drive.
Chapter 8 starting on page 181.
05-02-2022 01:44 PM
Oh wow, that service manual is AWESOME! I had no idea such a detailed document exists. Thank you so much!
And page 181 did indeed solve my problem.
I thought I needed to push the green button in order to pivot the DVD drive unit out of the chassis. Turns out it pivots without the green button, but... I needed to press the green button in order to release the catch which holds the drive in its rails.
I'm all set now. Thanks a million!