Acess to BIOs

[Dapergent]

Hi.  I have been trying to access the BIOs on my dektop to check or enable Visualization.  I have tried through settings,  (the UEIF button is there).  I press restart and end up with HP Utility setup.  I try by the F2 button and end up in the same place.  I sometimes end up with a blue square with the opportunity to press F10 which I believe should take me to the BIOs control but it takes me to utility set up.  The utility set up allows me to enable/disable the power to BIOs but not much else.  Where am I going wrong please.

[GamingOptional]

Press and hold the power button for 4 seconds until the computer shuts down.

Wait 5 seconds and press the power button once to start up the computer, then immediately begin pressing the ESC button on the keyboard once every second.

[Dapergent]

Hi GO.  Thanks for the reply.  This sequence gets me straight to the H10 option but this, I'm afraid, again takes me to HP configuration not the BIOs utility.  H10 is taking me to the wrong place.