cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
5 3 0 0
Message 1 of 3
303
Flag Post
HP Recommended

Black screen with no cursor after 1909 feature update

HP Pavilion Desktop PC 570-p0xx
Microsoft Windows 10 (64-bit)

I had this issue with 1903 too. System says ok for update. Using all of the update methods, and after updating BIOS and graphics drivers (and all W10 other updates) the feature update ends with a black screen and no cursor. System is unresponsive (though may be some drive activity). On rebooting (3x) only option is to wind back to old version.

Model has upgraded SSD (512Gb) and RAM (16Gb). [AMD-A10-9700 Radeon R7 on HP82FE11 board]

Does the graphics on this machine have a separate BIOS that I need to update (and then how?)?

Thanks.

2 REPLIES 2
Highlighted
HP Support Agent
HP Support Agent
12,329 12,295 539 604
Message 2 of 3
206
Flag Post
HP Recommended

Black screen with no cursor after 1909 feature update

@SnapperNeil
Thank you for posting on the HP Support Community.

 

Don't worry as I'll be glad to help, I have a few troubleshooting steps we could try to fix the issue:  

Before troubleshooting startup issues, remove or disconnect all discs and devices from the computer.

  • Step 1: Remove discs and devices
  • Step 2: Perform a hard reset
  • Step 3: Run hardware diagnostic tests
  • Step 4: Refresh or reset your PC. Click here: https://support.hp.com/in-en/document/c04718479 to complete the troubleshooting steps. By end of the article, you will be able to fix the issue.

To get the answer to this question, there's no separate BIOS for graphic card and controls various hardware devices that make up the computer.

 

Hope this helps! Keep me posted for further assistance.
Please click “
Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

ECHO_LAKE
I am an HP Employee

Reply
0 Kudos
Highlighted
New member
5 3 0 0
Message 3 of 3
105
Flag Post
HP Recommended

Black screen with no cursor after 1909 feature update

Hi,

I discovered the Radeon 'tidy-up' utility - it couldn't do a full clean up on the first run but on running again did.

However the move to the March 2020 driver* did not complete without the 'untidy' error still BUT it has resolved the BSoD with graphics apps (so far!).

(*found a report that said this resolved some instances of a black screen occuring.)

Won't get a chance to try a full update to W10 (as it takes c 1/2 day) for a bit.

Neil

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation