-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- How to create an recovery image for HP All –in-One PC, Mode...

Create an account on the HP Community to personalize your profile and ask a question
08-14-2020 01:47 PM
How do I create a recovery usb when the HP Cloud Recovery Tool states that my product id is invalid? The pc model is a HP All –in-One PC, Model 24 – f0011, Prod ID 3LB01AA#ABA. I also check to see if I could purchase the recovery usb through HP, but it is not available.
Solved! Go to Solution.
Accepted Solutions
08-14-2020 02:04 PM - edited 08-14-2020 02:05 PM
Hi,, @augustsj
According to this link, your PC is supported.
http://support.hp.cloud-recovery.s3-website-us-west-1.amazonaws.com/
I also just launched the tool, and entered your PC's product number, and it would allow me to make the installation media if I wanted to.
I selected the option to manually enter the product number.
After you enter the product number, press the Enter key.
Do not click off that box or you will get the invalid product number error.
08-14-2020 02:01 PM
Hi,
Is the current drive corrupted or failing? A bad HDD will require replacing the drive. What are your symptoms?
Did you run HP Diagnostics?
I was able to get to HP's Order software and driver media site (Link).
Or you could start the process fresh at this (Link) if my previous link expires. Look in "Order Recovery Media" at the second link.
You could also install Windows 10 clean, but you will probably lose some HP software, by following directions at the site (Link) to create W10 installation media.
Regards
08-14-2020 02:04 PM - edited 08-14-2020 02:05 PM
Hi,, @augustsj
According to this link, your PC is supported.
http://support.hp.cloud-recovery.s3-website-us-west-1.amazonaws.com/
I also just launched the tool, and entered your PC's product number, and it would allow me to make the installation media if I wanted to.
I selected the option to manually enter the product number.
After you enter the product number, press the Enter key.
Do not click off that box or you will get the invalid product number error.