• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
Microsoft Windows 11

I have an HP Pavilion 27-ca1244 Bundle AiO PC (577B6AA) - I installed a WD_Black SN7100 SSD M.2 - During the Windows 11 Install Via a USB Drive using the Windows Media Creation Tool Windows 11 Setup - It is not seeing the SSD Drive - So I am Trying to find the RST VMD Drivers to resolve the issue - Where Can I simply Down load the Drivers to place on the USB Media so I can Browse to the Driver that is required? - PLease note I did Download (From Intel) the SetupRST.exe but how do I access the Drivers from the Exe file on a working system to copy to the USB Windows installer Drive to be able to access the Drivers - Last just to make sure I had a clean slate to start from, I reset the default settings in the BIOS (F10) - I also tried replacing the original SSD m.2 THat works with out issue (I repartitioned the original SSD M.2) and it does the same1.jpg2.jpg3.jpge thing in the AiO HP Pavilion 27-ca1244 Bundle AiO PC (577B6AA)

3 REPLIES 3
HP Recommended

Hi @ecstefanov 

 

Download the following driver, then open with Winzip or 7-zip and unzip it 

 

HP Pavilion 27-ca1244 Bundle AiO PC (577B6AAR) Software and Driver Details

 

 

then look for the folder dchu_1_VMD, and copy it to the pendrive, and when you need to look for the disk it gives you that path in the pendrive (load driver)

- if I can help solve your question or issue, please click on ACCEPT AS SOLUTION or click the YES button if my answer was helpful.
HP Recommended

Thank you for your reply - I have downloaded and tried the the Drivers and same issue.  This is with resetting the BIOS to Default settings - The Original SSD, The New SSD and a Test Known Good SSD - None of them are seen by the Windows 10 or 11 Install Media created using the Media Creation Tool. Each SSD has been Partitioned - Each SSD appears and works without issue on 2 of my test systems and I tested to see if they are seen by the same USB Drive I am using to install Windows 11 (on A Dell and an HP Envy System) and the Windows Installer see's all 3 (Partition Information) - On the HP Pavilion 27-ca1244 Bundle AiO PC (577B6AA) - Still no sign of the internal 1TB new or Original....

HP Recommended

I don't understand in the image why you see the USB drive, you should not see it there, you installed windows at some point on the USB drive.

- if I can help solve your question or issue, please click on ACCEPT AS SOLUTION or click the YES button if my answer was helpful.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.