cancel
Showing results for 
Search instead for 
Did you mean: 
evang099
New member
1 0 0 0
Message 1 of 2
254
Flag Post

SD card reader missing from Device Manager on Z4

HP Recommended
Z4 workstation
Microsoft Windows 10 (64-bit)

My Z4 came with the SD card reader uninstalled.

 

After installing and plugging it into the mb, I don't see it in Device Manager,

and it is not discovered as a new device.

 

What am I missing here, and where can I find a suitable device driver?

TIA.

1 REPLY 1
IT-Velho
Level 3
25 25 3 3
Message 2 of 2
Flag Post
HP Recommended

Hi.

It may happened for some reasons:

  1. It is connected wrong. Check cables and correct connector on MB. Try another connector.
  2. It is faulty/damaged and don't work. Check on another computer. If same problem occurred, just replace it.
  3. USB devices disabled in BIOS settings for security reasons. Check that.
  4. I've seen Card-readers before, which don't detected in OS before you plug in SD-card (or other supported).

I can't imagine other reasons, why it don't detected on your OS.

Best regards,

IT-Velho

0 Kudos
Tags (1)
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation