• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP 280 G1 MT
Microsoft Windows 7 (64-bit)

I have an HP 280 G1 MT Intel Pentium G3250, OS Windows 7 Professional 64 bit.

The Intel Driver & Support Assistant reports the  motherboard product is 2B34 manufactured by HP.

In the device manager, SM Bus controller has yellow warning next to it

The hardware ID is as follow:

PCI\VEN_8086&DEV_8C22&SUBSYS_2B34103C&REV_05

PCI\VEN_8086&DEV_8C22&SUBSYS_2B34103C

PCI\VEN_8086&DEV_8C22&CC_0C0500

PCI\VEN_8086&DEV_8C22&CC_0C05

 

Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Yes, if it is no longer showing up in the device manager with a yellow warning ! mark next to it, the device has been successfully installed.

 

You will now see the SMBus Controller successfully installed and working properly in the device manager under the System Devices category in alphabetical order.

 

 

View solution in original post

5 REPLIES 5
HP Recommended

Hi:

 

Download the Intel chipset installation utility zip file from the link below...1st one on the left side of the page.

 

https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-?pr...

 

Right click on it, and select Extract All from the list.

 

Once the driver folder is created, open it and run the setup application.

 

If that doesn't get the smbus controller to install, try to manually install it as follows...

 

Go to the device manager and click on the smbus controller needing the driver.

 

Click on the driver tab.  Click on Update Driver.

 

Select the Browse my computer for driver software option, and browse to the unzipped chipset driver folder.

 

Make sure the Include Subfolders box is checked, and the driver should install.

 

Then restart the PC.

 

 

HP Recommended

Hi

Downloaded the file Chipset_10.1.1.42_public.zip, run SetupChipset.exe, restarted the PC.

Now in the device manager the SM Bus controller disappeared.

Is it Ok?

HP Recommended

Yes, if it is no longer showing up in the device manager with a yellow warning ! mark next to it, the device has been successfully installed.

 

You will now see the SMBus Controller successfully installed and working properly in the device manager under the System Devices category in alphabetical order.

 

 

HP Recommended

Thank you very much.

HP Recommended

You're very welcome.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.