Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting . Or if you need technical support for your calculator visit: HP Calculators. .
New member
1 0 0 0
Message 1 of 2
Flag Post

Trying to flash bios on hp envy desktop

HP Recommended
Hp envy 750-624
Microsoft Windows 10 (64-bit)

I need to make a usb flash drive bios recovery and the bios recovery utility i downloaded from hp will not get past the licensing screens.  It just stops running.  I have read other say it needs to run on another hp.  My only other pc to use is not an hp. Is there a way to make the utility work on a non hp pc? 

Level 16
Level 16
34,049 26,486 3,092 6,659
Message 2 of 2
Flag Post
HP Recommended


Given the date of your post, I would have expected someone to respond to it before this -- but since that has not happened, I will take a shot at it ...

Sorry, but the answer is basically NO.  But there is an alternative involving creating your own boot media, extracting the BIOS files, adding them to the boot media, and doing the BIOS update from there.


This is an indirect method for creating a BIOS update boot USB stick -- which comes in useful if you can not boot your PC into Windows and you need to do a BIOS update.

Macrium Reflect (MR) is a free tool that can be used to image and restore PCs, but it also has an option to create Rescue Media (is disk or USB form) that can then be used to Repair your PC.

It is available from here:

What I recommend is the following:
1) Download and install Macrium Reflect (MR)
2) Use the option to create a boot USB stick
3) Open File Explorer to point to the USB stick
4) Create a folder on the USB stick named Apps
5) Download the HP BIOS Update file (this is a self-extracting archive file)
6) Copy the HP BIOS Update file to the Apps folder on the USB stick

NOW, you have a bootable USB stick that also contains the HP BIOS update file

Boot your original PC from the USB stick. It will take a few minutes, so you have to be patient. Could be 3 MINUTES or longer -- it's slow.

The USB stick is designed to repair Windows problems, but you don't want to do that. So, when you get to the app, down at the bottom-left of the screen are three icons. The right-most is a file manager -- click that to open it. Then, find the HP BIOS Update file and double-click that. That will start the BIOS update process.

When it is done, remove the USB stick and reboot your original PC.

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation