dc7700 pci simple communications controller driver win 10

[Lyle67]

Hello!  

This started when I found out this used hp dc 7700 has a radeon x1300 in it that didn't have the right driver.  I don't remember the order I did everything in but now my device manager doesnt even show anything about a display adapter OR anything about a pci simple communications controller.  I think after I installed ATI's software my display adapter section disapeared then I noticed a flag by the pci simple communications controller.  I read something that lead me to believe something from intels site could get rid of the flag and maybe let me see my graphics card (HECI_allOS_2.1.22.1033_PV) but I think it just took away the pci part.  I can't find anything that supports my pc either because it's windows 10 or it may not have the requirements.  Before the pci simple communications controller disapeared it had a yellow flag next to it but I do still have its vendor and developer number. PCI\VEN_8086&DEV_2994&SUBSYS_2801103C&REV_02  I'd be thrilled if anyone can help!

[Paul_Tikkanen]

Hi:

You need this driver for that device...Manually install the driver if the auto install doesn't work.

https://downloadcenter.intel.com/download/10895/Intel-Management-Engine-Driver-for-963-and-965-Chips...

You should be able to manually install the Vista driver from your PC's support page for the x1300 graphics adapter.

This package contains the graphics driver for the supported ATI Graphics Cards in the supported desktop models and operating systems. NOTE: To determine the correct driver for your configuration, check the "Devices Supported" section, which is included on the Release Notes tab for each SoftPaq.

http://ftp.hp.com/pub/softpaq/sp42001-42500/sp42394.exe