screen flashes black

[tommydin]

This computer was purchased on 2/22/2020 and just recently the screen started at times while being used flashing black. I contacted Microsoft but they weren't able to solve the issue and told me to reset it back to factory settings.

 I am contacting you to see if there is maybe an issue with the computer itself.

Thanks,

Tommy

[praveen196]

@tommydin Welcome to HP Community!

I understand that the screen flashes black.

Do not worry. I will try to fix the issue.

If you haven't, Please try an alternate monitor to understand if this is either a hardware or a software failure, 

if the issue does not appear on the alternate monitor, you may need to replace the display assembly on your computer, 

if the issue appears on the alternate monitor/TV as well, re-install the graphics card drivers & update it from the official HP Website: Click here 

  

If you don’t have an alternate monitor, I recommend checking if the issue appears on the BIOS screen (restart the computer and tap on F10 to access BIOS) 

If the issue does not appear in BIOS, reinstall the graphics card drivers & update BIOS using the above link, 
If it does, you may need to replace the LCD/Repair the computer: 

  

If the issue occurred after an accident (such as dropping it on the floor, liquid spilled on it, etc.) there could be a hardware failure and in such cases, you may need to get the computer repaired via HP (there could be a charge involved if the PC isn't covered by the accidental damage protection plan) 

  

Reply with the result of the above-mentioned steps, for further assistance. 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!