Upgrafe motherboard pegatron 2AC2.. 1.02A

[BeemerBiker]

---

@Shaffry100 wrote:

to beemerbiker; i have install modded carmel 2 bios but coller fan spinning very fast and make a loud noise. and why app safeuwinp.exe, when used command klik / have no is close app, that app cannot be used command

---

? I do not understand what you are asking above ?

@BeemerBiker wrote:

You will need the Rev 2.0 of the IPISB-CU motherboard unfortunately

I do not recommend using that GPU mod for the Carmel 2 as you have 1.02

---

[john_smith6]

To update your Pegatron motherboard model 2AC2... 1.02A with AMI BIOS version 7.16 to version 2.0 and successfully upgrade your processor to an i7 2600, follow these steps:

1. **Download the Latest BIOS Update:** Visit the official Pegatron website or your motherboard manufacturer's website to find the latest BIOS update for your motherboard model (2AC2... 2.0). Download the appropriate BIOS update file.

2. **Backup Your Data:** Before proceeding, ensure you back up any important data on your computer in case anything goes wrong during the BIOS update process.

3. **Prepare a Bootable USB Drive:** Format a USB flash drive as a bootable device and copy the downloaded BIOS update file onto it.

4. **Enter BIOS:** Restart your computer and enter the BIOS setup by pressing the appropriate key (usually F2, F10, or Del) during the boot-up process.

5. **Update BIOS:** Within the BIOS setup, look for an option like "EZ Flash," "Q-Flash," or a similar name. Use this utility to browse and select the BIOS update file from the USB drive. Follow the on-screen instructions to initiate the update process. Do not interrupt this process, as it could damage your motherboard.

6. **Wait for Update:** The BIOS update process may take a few minutes. Once completed, the system will automatically restart.

7. **Check Processor Compatibility:** After the BIOS update, check if the i7 2600 processor is now supported. Go to the BIOS setup and look for any settings related to CPU compatibility or advanced settings. Ensure that the CPU is recognized and supported.

8. **Save and Exit:** If everything looks good in the BIOS, save your settings and exit.

9. **Install i7 2600:** With the updated BIOS, try installing the i7 2600 processor again. Make sure it's properly seated in the socket and that the cooling solution is correctly applied.

10. **Test and Monitor:** Start up your computer and monitor its performance. Ensure that the new processor is being recognized and utilized correctly.

If you encounter the "unsupported CPU installed" error again, double-check that the BIOS update was successful and that the CPU compatibility settings are correctly configured. If the issue persists, it's recommended to contact Pegatron's customer support or your motherboard manufacturer for further assistance.

Remember that BIOS updates carry a certain level of risk, so proceed with caution and make sure to follow the instructions provided by the motherboard manufacturer closely.

[JackWalton]

I Have Same Motherboard, Have Same Issue (Using i7 2700K). When The Messege Post,I Just Press F1 And It Boot Nomally

(Pegatron 2AC2-ipisb-cu v1.02a Not Support 95w Chip,Only Support Cpu Under 65w

[JackWalton]

Pegatron 2AC2 v1.02a ( ipisb-cu ) Dont Have Flash Function, So It Can't Flash BIOS

[JackWalton]

How To Install It? ( If You Use Discord dm Me ducckt#8231 )