HP 22 er Monitor Screen turns on and off all the time

[abdulmomin]

HP 22 er Monitor Screen turns on and off all the time

[Jeet_singh]

@abdulmomin,

Thank you for reaching out to us on HP Support Forums. I see from your post that you are having issues related to your HP Monitor.

Don't worry I'll try to help you out.

For better clarity and to assist you better, I would require more information regarding this:

• Did it happen after a power outage or surge?
• Have you tried to reset the monitor to factory defaults?
• Did you make any changes to the monitor?
• Have you tried checking with a different power cable on your monitor?

For starters please try these steps.

Please perform a hard reset on the monitor:

Steps:

• Disconnect the monitor’s power cord and the cable from the computer.
• Please press and hold the power button of the computer for about 20 seconds to discharge static electrical charges.
• Reconnect the power cord and check if the monitor goes blank or flickers without connecting it to the computer.

Then check if the issue gets resolved. If it continues, please try the steps.

1. Press the Auto or Autoselect button on the display.
2. Press Menu, and select Factory Reset.
3. If the display has more than one type of connection available such as VGA, DVI, or HDMI, try a different type of connection.
4. Set the video resolution on the computer to match the native resolution of the display. Find the native resolution for your display from the box the display came in, the Monitor User Guide, or product specifications. To change the display resolution, use the following steps:

Alternatively, I would suggest you follow these steps here: 

HP Flat Panel LCD Monitors - Monitor is Blank

HP and Compaq Flat Panel Displays - Display Quality Issues

If the issue still persists after trying out the steps. It is a hardware issue with your monitor.

I will share you a private message with details. Please watch your inbox for more information.

If the solution provided worked for you, please mark an accepted solution for this post.

Let me know if this helps!

Have a great day ahead! 🙂

If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below,

Followed by clicking on "Accept as Solution" from the drop-down menu on the upper right corner.