HP Display Control

[lovelydee_16]

Good Evening,

Every time that I restart or put my computer to sleep this window appears on the right side of the screen HPDC_Service.  I than download the information, install HP Display Control and it stills continue to come up that this needs to be installed.  Please help this is very annoying

[praveenbv]

Hi@lovelydee_16, Welcome to the HP Support Community!

Don't worry I'll try to help you out.

Did you make any software or hardware changes on your PC?

We understand that after waking up from the sleep mode display appearance getting changed.

 Request you to follow the below troubleshooting steps.

Please follow the below steps: 

Step 1: Enabling the Keyboard in Windows 

Skip this step if the computer does not enter sleep mode or if the computer wakes unexpectedly. 

Follow these steps to enable your keyboard to wake your computer from sleep mode: 

1. In Windows, search for and open the Device Manager. 

2. Click the arrow next to Keyboards and double-click the name of your keyboard. 

3. If the Power Management tab is available, proceed to the next step. 

If the Power Management tab is not available, click the Change Settings button if it appears below the Device status box. The same Keyboard Properties window opens with the Power Management tab available. 

If you are prompted for an Administrator password or confirmation, type the password or provide confirmation. 

1. Click the Power Management tab and make sure that the box next to Allow this device to wake the computer is checked. 

2. Click OK, and then test to make sure that the keyboard can now wake the computer. If the computer still cannot wake from sleep mode, continue using these steps. 

3. For instructions on how to update the BIOS of your computer, see one of the following HP support documents: Updating the BIOS (Notebooks) 

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!

[lovelydee_16]

None of the solutions solved my issue

[praveenbv]

Hi@lovelydee_16,

We apologize issue still persists. let's do the system recovery.

I recommend you follow the below steps and check if it helps.

1. Turn off your HP laptop.
2. Disconnect all external devices (printers, USB drives, etc.) from your computer.
3. Remove all recently added internal hardware.
4. Press the Power button to switch your HP laptop on.
5. Once your unit starts booting, immediately press the F11 key. Repeatedly press it until you see the Choose an Option screen.
6. Select Troubleshoot.
7. Choose Reset this PC.
8. You can either opt to keep your files or to remove everything.
9. Select Keep My Files when you want to retain your data. Once you click Reset, your operating system will be reinstalled. The process may take a while.
10. Choose Remove Everything when you want to remove all your personal files.
11. You can opt to remove everything solely on the drive where your operating system is installed. On the other hand, you can click All Drives when you do not want to retain any data.
12. You can also fully clean the drive you selected or just remove your files.
13. Click Reset.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

[Jerry9778]

If your laptop has a removable battery slide the battery release latch and then remove the battery. Press and hold the power button for 15 seconds reconnect the power adapter to the laptop. UPSers

[praveenbv]

Hi@Jerry9778,

I recommend you follow the below steps and check if it helps

Do you see a light at the place where the charger connects to the laptop? If yes then it indicates that the charger is all fine.

I recommend you to perform the following steps to isolate the issue and arrive at a fix: 

• Remove the battery out. If the battery is integrated and does not have a latch to release it then leave the battery inside the laptop.
• Disconnected AC adapter from the laptop.
• Press and hold the power button for 15 seconds.
• Reconnect the battery and plug the AC adapter.

F6 + Power Button

• CMOS Rest ( combination of windows button and letter 'V' then push the power button ones and release the windows and letter 'V' after 5sec

If the laptop does not power on then please continue with the below steps:

• Disconnect the charger and remove the battery out.
• Connect only the battery and check if the laptop powers on.
• Likew