HP Omen Command center not recognizing 2nd monitor

[FlashDave]

Hello,

I have 2 HP Omen X 27 monitors and the Omen command center only recognizes one. How do I get both on there to adjust setting so I don't need to use these pesky buttons on the back. I've tried uninstalling and installing the command center again but nothing seems to work. Thank you for your time.

[praveen196]

@FlashDave Welcome to HP Community!

I understand that you are unable to connect the HP Omen X 27 monitors.

Please let us know how you are connecting the monitor to the computer.

I suggest you first uninstall the software completely from the control panel > programs 

Next run the SFC scan. you can refer to this Link: https://support.microsoft.com/en-in/help/4026529/windows-10-using-system-file-checker

Then download the latest Omen Command Center from this Link: https://www.microsoft.com/en-us/p/omen-command-center/9nqdw009t0t5?activetab=pivot:overviewtab

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!