HP Pro 3400 Microtower PC

[nicolay4ever]

really you make me angry and if not help me i will never use product hp , i have 20 pc for 3400 microtower and i want to put vga card 1050 with 6 pin power , my problem is when i put vga stuck on splash HP logo , and i tried a lot of settings in bios and i update bios as well from website , i have only 1 pc 3500 microtower and its run as well with same vga "GPU" and same power supply unit , please help because i have net cafe and you let me change all pc for only small software "bios" , i will lose my work for that , and i can give you all information about my products serial info , i am waiting ! 

[Lil_Boy_Blue]

Hi

So you have 1 or more of these....

https://support.hp.com/us-en/product/hp-pro-3400-microtower-pc/5160137

This manual covers the 3400 and 3500 range.

http://h10032.www1.hp.com/ctg/Manual/c03550748

It is possible that the Power Supply is the same, and also the Main Board.

If you put the SKU: into http://partsurfer.hp.com/search.aspx it may show if the Main Boards are compatible.

[nicolay4ever]

you don`t answer me lol , you just put link for doucment , that not support , i need good answer and how to solve my problem ! 

[Lil_Boy_Blue]

Hi

I posted the help links.

If you want support I suggest you contact HP directly and pay the going rate.

Also because you do not post your problem fully no one is likely to offer help.

Logic.

The 3400 and 3500 can share the same PSU and Main Board, perhaps even the same BIOS.

But without you giving the details, only you know them, help is unlikely.

So give an SKU: for each machine or better still pay HP for support.

[nicolay4ever]

pay support if you sure will fix my problem or give me new bios i will .. but if you are not sure remove this theard and i will sale my all pcs and i will never use your products .. thanks