How to remove the case of my desktop computer

[1prowheel]

How do I remove the case of my computer? There is a lot of dust in it and my computer is acting up.

[Riddle_Decipher · Accepted solution]

@1prowheel Here's all you need to know,

And Before you begin:

• You need a flathead screwdriver.

• Remove the Pocket Media Drive, if it is present.

• Turn off the computer, and then disconnect all cables. Disconnect the Ethernet or modem cable before disconnecting the power cord.

• Transfer the computer to a clear, flat, stable work surface over a non-carpeted floor.

• HP strongly recommends the use of an anti-static wrist strap and a conductive foam pad when working on the computer.

• Do not remove a component from its protective packaging until you are ready to install it.

   WARNING: 

The edges of metal panels can cut skin. Be careful not to slide skin along any interior metal edge of the computer.

   CAUTION: 

This product contains components that can be damaged by electrostatic discharge (ESD). To reduce the chance of ESD damage, work over a non-carpeted floor, use a static dissipative work surface (such as a conductive foam pad), and wear an ESD wrist strap connected to a grounded surface.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE

(By the end of this article all the issues should be resolved)

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!